代理商直供， 日本北阳，HOKUYO，KAD-200

本公司是日本北阳，HOKUYO，华东代理商，质量上乘，业界公认！
可根据用户要求开17%增值税发票，欢迎来电洽谈！

• • It is easy to set optional detecting distance by pushing the button for distance setting.
  • It always makes a self-diagnosis with inner circuit and it prevent the troubles beforehand.
  • It is easy to make an optical axis with 5-point level meter.^*

  规格

  型号	Photo sensor:KAD-200, Reflector:RRP-KAD01
  电源	AC100V to 240V( 15%, -10%, 50/60Hz)
  电力消耗	10VA or less when 100VAC, 15VA or less when 200VAC
  输出	控制输出 (OUT1,2)	1C relay(250VAC 3A, cosφ=1) Relay isn't excited and LED lights up when within setting distance
  故障输出 (FAULT)	1C relay(250VAC 3A, cosφ=1) Relay isn't excited and LED lgiths up or flickers when light-projecting/light-reception amount is getting lower or troubled
  模拟量输出	It output distance data/light-receiving amount*1with analog value. (Don't use it except for adjustment)
  绝对精度/ 重复度	±400mm, ±200mm
  解析度	80mm
  检测距离	0.4 to 20m
  Hysteresis	500mm
  应答时间	≤50ms*2
  环境照度	Halogen and mercury light : 10,000lx or less, fluorescent lamp : 6,000lx
  环境温湿度	-10 degrees C to 55 degrees C, 85%RH or less(not condensing, not icing)
  快冲击性能	490m/s2(50G) each 10 time for X, Y and Z direction
  连接系统	Terminal box with 15 pins(M4 screw)

  *1 Changeover by mode setting switch(T side : light-receiving amount analog output, R side : Distance analog output)
  *2 Don't operate during 2sec after putting power source on.

  外部尺寸

  ●传感器

  

  ●反射器

  

  外部连接

  Distance analog output(R mode) Light-receiving amount analog output(T mode)
  M4 terminal box

  
  控制输出(OUT1,OUT2)

  端子 No.	1-2	2-3	4-5	5-6
  Power-OFF state	OPEN	CLOSE	OPEN	CLOSE
  Power-ON state	Within setting distance	OPEN	CLOSE	OPEN	CLOSE
  Over setting distance	CLOSE	OPEN	CLOSE	OPEN

  
  故障输出(FAULT)

  Terminal No.	9-10	10-11
  Power-OFF state	OPEN	CLOSE
  Power-ON state	When normal	CLOSE	OPEN
  When troubled	OPEN	CLOSE