在线有毒气体监测仪/固定式甲基异丁基甲酮气体检测仪 20个探头，防爆 德国 0-100％LEL 型号:C7STATOX 501 货号: 有毒气体监测仪/固定式甲基异丁基甲酮气体检测仪 20个探头，防爆 德国 0-100％LEL C7STATOX 501
基本配置：
1.501可燃气体探头ExE ARE*20个，0-100％LEL
2.501 HRC校验器适配器 1台
3.501 控制模块 20个
4.通用报警模块 1个
5.电源 50W,10组 2个
固定式气体检测报警系统，用于氧气，有毒气体及可燃气体
导轨式现代控制器，大大节省了空间，费用和安装时间。
传感器探头加上一台控制器即可组成一套完整的气体检测系统，测量数据可永久保存。
安装简单，使用方便
控制器电源和普通报警模块连在导轨控制器上。
传感器更换简单可行。
Fixed gas detection system for oxygen, toxic and combustible gases
The DIN – rail mounted modern controller saves space, money and installation time.
One safe controller for all gases: Any combination of a sensor head plus a controller is a complete gas detection system. This is what makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum expenditure.
Programs for any gas and measuring range are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button.
Easy to install and easy to use
The controller as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the controller. The Statox 501 controller has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included.
Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the new 501 controller! Just follow the menu!
If sensor heads are to be installed in pision 1 areas, they can be connected via intrinsically safe repeaters.
24 V power supply as well as the signals for the common alarm module are transmitted via bus from one controller to the next. All terminals are easily accessible from the front.
Field proven sensors for reliable gas detection
Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The sensor remote heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display.
Combustible gases can detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified and can be connected directly to the controller even if they are to be used in classified areas. The controller can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your inpidual application needs.
Easy maintenance saves time and money
Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas.
Accessories
A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a
19”-carrier, ensure an easy professional installation
产品图片
