图文详情
产品属性
相关推荐
SenseAir森尔二氧化碳传感器概述
深圳源建传感器科技有限公司专业代理销售SenseAir森尔二氧化碳传感器,我们的产品保证百分百原装进口!当然您有什么SenseAir S8传感器使用过程中的问题也可以向我们进行电话咨询!深圳源建为您提供更专业的SenseAir S8传感器服务!
SenseAir森尔二氧化碳传感器相关参数
Item: SenseAir S8
Target gas: CO2
Operating Principle:Non-dispersive infrared (NDIR)
Measurement range: 400 to 2000 ppm (Note 1). 0 to 10000 ppm extended range (Note 2)
Measurement interval: 4 seconds
Accuracy :±40ppm ±3% of reading (Notes 3 and 4)
Pressure dependence: + 1.6 % reading per kPa deviation from normal pressure
Response time: 2 minutes by 90%
Operating temperature:0 to 50° C
Operating humidity: 0 to 85% RH non condensed
Storage temperature: -40 to +70 C
Dimensions: 33.5 x 20 x 8.5 mm (max dimensions)
Weight: < 8 grams
Power supply: 4.5 V to 5.25 V unprotected against surges and reverse connection
Power consumption: 300 mA peak, < 18 mA average.
Life expectancy: 15+ years
SenseAir森尔二氧化碳传感器绝对最大额定值
压力大于表中列出的5月2日对设备造成永久性损坏。这些评级
只有压力等级吗?。设备在任何情况下的操作。
这些规范的操作部分不是隐含的。暴露于绝对最大额定值
延长周期可能影响设备的可靠性。
SenseAir森尔二氧化碳传感器实拍图
SenseAir森尔二氧化碳传感器实校准说明
Rough handling and transportation might result in a reduction of sensor reading accuracy. With time,
the ABC function will tune the readings back to the correct numbers. The default “tuning speed” is however limited to about 30-50 ppm/week.
For post calibration convenience, in the event that one cannot wait for the ABC algorithm tocompensate for possible calibration offset two manual calibration procedures are offered. A switchinput is defined for the operator or master system to select one of the two prepared calibration codes.
Optional calibrations are bCAL (background calibration), which requires that the sensor is exposed to fresh air (400 ppm CO2) and CAL (zero calibration), which requires the sensor measuring cell to be completely evacuated from CO2 e.g. by exposing it to Nitrogen or Soda Lime CO2 scrubbed air.
Make sure that the sensor environment is steady and calm!
(粗略的搬运和运输可能会降低传感器的读数精度。随着时间的推移,
ABC函数将读数调整到正确的数字。然而,默认的“调谐速度”限制在大约30-50 ppm /周。
用于校准后的方便,如用于校准ABC算法可能无法抵消补偿等提供了两个手动校准程序。一个开关量输入定义的算子或主系统选择一个准备校准规范。
可选的校准BCAL(背景校正),这就要求传感器暴露于空气清新(400 ppm的CO2)和CAL(校零),这就要求传感器测量细胞完全撤离CO2通过暴露于氮或二氧化碳空气擦洗碱石灰。
确保传感器环境稳定、平静!)
SenseAir S8
SenseAir
是
全新