艾灸烟雾净化器厂家

EWO™系列环保烟雾过滤净化系统专门针对焊锡浸锡沾锡、波峰焊回流炉、激光加工、实验室等各种烟雾、粉尘、微粒、气味的过滤净化。本机特点有吸力大、耗电低、过滤效率高、操作简单、移动灵活等特点，产品已被国内外众多企业所采用。

适用场合：
◎烙铁焊锡、锡炉沾锡
◎波峰焊、回流炉
◎激光焊接、雕刻、打标、切割
◎打磨、抛光、印刷
◎化学实验室

This illustration distinctly shows the importance of using a fume extraction system, even when soldering only once in a while or for just a few hours a day. The captured particles are primarily condensed residues from flux. Without a filter system these particles ill be partly inhaled the operator with the remainder spread over the work object and workplace. In contrast, a proper filter system will eliminate not only the particles, but will also catch and eliminate dangerous gases created in the soldering process.

烟尘过滤（净化）原理:

用风机将烟雾抽入机箱，通过内置的滤芯进行过滤，主要能够起到过滤粉尘

、异味、有毒气体和杀灭部分细菌的作用。滤网又分：集尘滤芯、玻纤滤芯、

HEPA滤芯、活性炭滤芯等。其中最关键就是活性炭滤芯，它能起到分解有毒气体

和杀菌作用，特别是抑制二次污染。产品的特点是风机功能以及滤芯的质量决定

净化效果，机器的放置以及室内布局影响净化是否完全，室内净化效果是否均衡

。滤芯需定期更换。

烟雾组成成分及危害:
通常在焊接烟雾中有95％是焊料及助焊剂在高温下挥发出的微粒，这些微粒

飘浮在空气中在一定的光线照射下人眼可以观察到，即我们能够看到的烟雾。而

另外有5％是以气体方式散发在空气中，我们的肉眼是看不到的，而这些气体中

含有大量的一氧化碳、二氧化碳、甲醇、乙醇、甲烷、甲醛等有害性成分。
操作者长时间在以上环境下工作，吸入过量有毒物质，将会引起头痛、恶心、哮

喘、慢性支气管炎等症状，严重影响身体健康，同时也影响正常生产。
Hazardous smoke and fumes, harmful to your health if inhaled, are

present in many workplace environments. Operations using lead-free

solder, lasers, solvents, and glues are especially at risk.

Overexposure can lead to serious – and possibly long term – medical

problems.Health difficulties such as nosebleed, eye irritation, and

sore throat are occurring with increasing frequency in the workplace,

as are incidences of dermatitis, occupational asthma, and, in some

cases, permanent lung damage.

购买烟雾净化器与安装大型管道优劣比较：