|
新一代电力供应
The MX Series represents a new generation of multiple output laboratory power supplies from Aim-TTi.
MX系列代表从目的TTI的多路输出电源的新一代实验室。
Offering high power within a compact format they use ranged switched mixed-mode regulation with display and control via a large backlit graphic LCD and soft keys.
提供高功率紧凑的格式在他们使用远程切换显示和控制的混合模式的调节通过大型背光液晶和软钥匙。
The first models in the MX Series, the 315 watt triple output MX100T and MX100TP are available now.
在MX系列的第一个车型，315瓦的三输出mx100t和mx100tp现在是可利用的。
Three full-performance outputs - 3 x 105 watts
三完整的绩效产出- 3 x 105瓦
The MX100T differs from most other triple output power supplies in having three outputs of equal power, each with the ability to provide 0 to 35V at 0 to 3A.
该mx100t不同于大多数其他三输出电源有三个相等的输出功率，每提供0至35V的在0～3a的能力。
Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch.
每个输出功能，同时高分辨率的计量，可切换的遥感，和一个单独的输出开关。
Mixed-mode regulation
混合模式的调整
To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.
提供令人印象深刻的功率密度的MX系列结合高频开关式预调节线性后调控提供性能接近的所有线性设计。
Excellent line and load regulation is matched by low noise and good transient response.
出色的线路和负载调节是由低噪音和良好的瞬态响应匹配。
Range switching and power control
量程转换和功率控制
To increase its ability to match a variety of applications, each output has more than one range.
为了提高匹配的各种应用程序的能力，每个输出有一个以上的范围。
Outputs one and two can provide 16V/6A as an alternative to 35V/3A, while output three can provide 70V/1.5A.
输出一个和两个可为16V / 6A作为一种替代35V / 3A，而输出三能提供70V / 1.5A。
When higher power is required, outputs two and three can be combined internally to provide up to 210 watts as either 35V/6A or 70V/3A from a single output.
当高功率的要求，输出两个和三可以结合内部提供高达210瓦为35V / 6A或70V / 3A从一个单一的输出。
Remote control for system applications
远程控制系统的应用
The MX100TP incorporates USB, RS232, GPIB and LXI compliant LAN interfaces.
该mx100tp采用USB，RS232，GPIB和LXI的标准接口。
These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
这些提供完整的远程控制和回读功能，通过高级语言应用的IVI驱动程序支持。
Duplicate power and sense terminals are incorporated at the rear.
重复的功率和Sense端子结合在后面。
The compact half-rack 3U size uses front input ventilation which enables vertical and horizontal stacking without the need for additional ventilation space.
紧凑的半机架3U尺寸使用前输入通风使垂直和水平叠加而不需要额外的通风空间。
A 3U rack mount suitable for one or two units is
一个3U机架安装适用于一个或两个单位
产品特点：
高性能输出（105•three每瓦
3 x (0 to 35V at 0 to 3A)
x（0）3（0至35V的3A）条
•Total power of 315 watts in a highly compact package
•total 315瓦的功率在一个紧凑的封装
•Range switching gives up to 70 volts and up to 6 amps
到了70•range切换到6伏特和安培
•Twelve range combinations for maximum flexibility
•twelve组合在最大范围。
•Up to 210 watts from a single output
从•up到210瓦单输出
•Low output noise and ripple via linear final regulation
•low输出噪声和纹波通过线性调节
•High setting resolution of 1mV and 0.1mA (output 1)
•high设置分辨率为1mV）和输出（1）
•Variable OVP and OCP trips on all outputs
•variable PPO和OCP全输出旅行在线
•50 setting memories per output + 50 linked memories
每单位产出的记忆•50 + 50链接存储器
•Selectable voltage tracking (isolated tracking)
•selectable（隔离电压跟踪跟踪）
•Selectable current meter averaging
•selectable平均电流仪表
•Switchable remote sense on all outputs
所有的输出•switchable远程侦听在线
•Graphic LCD provides simultaneous output metering
液晶显示器同时输出提供•graphic计量
•Numeric or spin-wheel control of all parameters
•numeric或旋轮控制所有参数
•Individual or combined output on/off control with
•individual或组合输出开/关控制。
programmable delay sequencing.
可编程延迟序列。
•Front panel locking with optional pass-code protection
•front面板锁和可选的通码保护
•3U half-rack case for bench or rack mounting
•3u半台架或机架安装的情况下
•GPIB, RS-232, USB and LAN (LXI) interfaces (MX100TP
•gpib、RS-232、USB和LAN接口（mx100tp（LXI）
|
