TP-DK8系列机床控制变压器

TP-DK8系列机床控制变压器

概述

TP-DK8系列机床控制变压器，其外形尺寸，安装尺寸，使用场合与TP-DK6系列机床控制变压器相同。
本系列机床控制变压器在TP-DK6系列机床控制变压器基础上改进了其接线端子，在原有IT冷压接线方式的基础上增加了插接式接线端口，使接线方式更为灵活多样，更能满足不同用户的不同需求，另外本系列变压器线圈内部还设置了短路与温度保护开关，*了其使用的*性，延长了其使用寿命，产品*合GB5226，*/T5555-2001，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000等有关*、国际标准，并荣获欧共体"CE"认证，证书编号：LVD100607-01，可与国外产品互换使用。

TP-DK8系列机床控制变压器技术特性

初级次级绕组分开绕制，当次级只有一个绕组时，它担负变压器的*额定容量，次级如兼有控制、照明及指示灯绕组时，则按各绕组容量分配分别绕制，对单绕组且有中间抽头的变压器其各中间抽头容量，皆小于变压器的额定容量，只有*高电压输出端可担负额定容量。

TP-DK8 Series Machine tool Control Transformer

Application:

TP-DK8 series transformer is the same as TP-DK6 series transfromer in application , dimension and installation size. TP-DK8 transformer improved terminal block on the base of TP-DK6 model.It addsinsert connection in IT end sleeves connection, which make connection modelmore agility and multiplicity so that the goods can meet different requirements of various customers. And even more, TP-DK8 sets thermostat and switch of short circuit in the coils so as to increase using reliability and prolong the lifetime.It conforms to GB5226，*/T5555-201，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000and gets CE approval. Verification Number:LVD100607-01.

TP-DK8 series engine bed control transformer technology characteristic

primary secondary circles the system separately, when secondary when a winding, it shoulders the transformer completely the rated capacity, when secondary like has at the same time the control, the illumination and the indicating lamp winding, presses various windings capacity *ignment to circle the system separately, to simplex winding, and has intermediate tap's transformer its each intermediate tap capacity, is smaller than transformer's rated capacity, only then the overvoltage out-port may shoulder the rated capacity.