典型应用

描述

The LTC®4412HV controls an external P-channel MOSFET to create a near ideal diode function for power switchover or load sharing. This permits highly efficient OR’ing of multiple power sources for extended battery life and low selfheating. When conducting, the voltage drop across the MOSFET is typically 20mV. For applications with a wall adapter or other auxiliary power source, the load is automatically disconnected from the battery when the auxiliary source is connected. Two or more LTC4412HVs may be interconnected to allow load sharing between multiple batteries or charging of multiple batteries from a single charger. The LTC4412HV is an extended supply and temperature range version of the LTC4412.

The wide supply operating range supports operation from one to eight Li-Ion cells in series. The low quiescent current (11μA typical) is independent of the load current. The gate driver includes an internal voltage clamp for MOSFET protection.

The STAT pin can be used to enable an auxiliary P-channel MOSFET power switch when an auxiliary supply is detected. This pin may also be used to indicate to a microcontroller that an auxiliary supply is connected. The control (CTL) input enables the user to force the primary MOSFET off and the STAT pin low.

The LTC4412HV is available in a low profile (1mm) SOT-23 package.

浏览此产品的人也参考

• LTC4412 - 采用 ThinSOT 封装的低损耗 PowerPath^TM 控制器
• LTC4359 - 具反向输入保护功能的理想二极管控制器
• LTC4364 - 具理想二极管的浪涌抑制器
• LTC4415 - 具可调电流限值的双通道 4A 理想二极管
• LT4320 / LT4320-1 - 理想二极管桥控制器
• LTC4358 - 5A 理想二极管
• LTC4417 - 确定了优先级的 PowerPath^TM 控制器
• LT4363 - 具电流限制功能的高电压浪涌抑制器
• LTC4370 - 双电源二极管 “合路” 电流平衡控制器
• LTC4414 - 用于大 PFET 的 36V、低损耗 PowerPathTM 控制器