TPS61070DDCR开关稳压器 Adj原装德州TI

地区:广东 深圳
认证:

深圳市中立信电子科技有限公司

金牌会员12年

全部产品 进入商铺

1 Features 3 Description

The TPS6107x devices provide a power supply 1• 90% Efficient Synchronous Boost Converter

solution for products powered by either a one-cell,

– 75-mA Output Current at 3.3 V From 0.9-V two-cell, or three-cell alkaline, NiCd or NiMH, or oneInput

cell Li-ion or Li-polymer battery. Output currents can

– 150-mA Output Current at 3.3 V From 1.8-V go as high as 75 mA while using a single-cell

Input alkaline, and discharge it down to 0.9 V. It can also

be used for generating 5 V at 200 mA from a 3.3-V • Device Quiescent Current: 19 μA (Typ) rail or a Li-ion battery. The boost converter is based

• Input Voltage Range: 0.9 V to 5.5 V on a fixed frequency, pulse-width-modulation (PWM)

• Adjustable Output Voltage Up to 5.5 V controller using a synchronous rectifier to obtain

• Power-Save Mode Version Available for maximum efficiency. At low load currents the

TPS61070 and TPS61073 enter the power-save Improved Efficiency at Low Output Power

mode to maintain a high efficiency over a wide load

• Load Disconnect During Shutdown current range. The power-save mode is disabled in

• Overtemperature Protection the TPS61071 and TPS61072, forcing the converters

The TPS6107x output voltage is programmed by an • All One-Cell, Two-Cell, and Three-Cell Alkaline,

external resistor divider. The converter can be NiCd or NiMH or Single-Cell Li disabled to minimize battery drain. During shutdown, Battery-Powered Products the load is completely disconnected from the battery.

• Portable Audio Players The device is packaged in a 6-pin thin SOT23

• PDAs package (DDC).

• Cellular Phones Device Information(1)

• Personal Medical Products

• White LED Lighting
TPS61070DDCRTPS61070DDCRTPS61070DDCRTPS61070DDCRTPS61070DDCR


1特征3描述

TPS6107x装置提供1•90%效率的同步升压转换器

产品的解决方案由一个电池供电,

- 75毫安输出电流在3.3 V从0.9-V二电池,或三电池碱性,镍镉或镍氢,或一个输入

电池锂离子或锂聚合物电池。输出电流可以

-使用单片机时,1.8-V的150毫安输出电流高达75毫安

输入碱性,放电至0.9 V。它还可以

用于生成5 V 3.3 200 mA - V•设备静态电流:19μA(Typ)铁路或一个锂离子电池。升压转换器是基于

•输入电压范围:在固定频率上0.9 V - 5.5 V,脉宽调制(PWM)

•可调输出电压5.5 V控制器使用同步整流器获得

•省电模式版本,最高效率。在低负载电流

TPS61070和TPS61073进入低功率节能,提高效率

在宽负载下保持高效率的模式

•关闭电流范围内的负载断开。电源保存模式被禁用

•过热保护TPS61071和TPS61072,迫使转换器

TPS6107x输出电压由一个•所有一个单元,两个单元,和三个单元碱性,

外部电阻分压器。转换器可以被NiCd或NiMH或单细胞锂禁用,以减少电池损耗。在关机期间,电池供电的产品负载完全断开电池。

便携式音频播放器设备被包装在一个6针薄的SOT23

•PDAs package (DDC)。

•手机设备信息(1)

•个人医疗产品

•白色LED照明



制造商:

Texas Instruments

产品种类:

开关稳压器

安装风格:

SMD/SMT

封装 / 箱体:

SOT-23-6

输出电压:

1.8 V to 5.5 V

输出电流:

700 mA

输出端数量:

1 Output

输入电压:

5.5 V

拓扑结构:

Boost

输入电压:

0.9 V

开关频率:

1.2 MHz

工作温度范围:

- 40 C to + 85 C