升压LED 模块电源
地区：上海 上海市
认证：
无
图文详情
产品属性
相关推荐
升压恒流模块，适合LED 大功率洗墙灯，路灯。
| All conditions listed below are guranteed at ambient of 25degC, Full Load and Vin=24VDC unless otherwise stated. | ||||||||||
| Model : | SPECIFICATIONS | |||||||||
| *TE | LNS-30W-45V | |||||||||
| Input Characteristics | ||||||||||
| Input Voltage (max) | Vin | DC:15VDC-26VDC (13 ~ 26VDC) | ||||||||
| Input Current | Iin | (max) 2.3A @ 15VDC | A | |||||||
| Output Characteristics | ||||||||||
| max Output Voltage | Vout | 46 | V | |||||||
| Output Voltage range | Vout | 46 | >15 | V | ||||||
| OutputConstant Current | 1 | Io(rated) | 650 | t*e | mA | |||||
| max Output Power | 1 | Pout | 30 | W | ||||||
| Ripple & Noise | 2,5 | 200(max) | mV | |||||||
| Load Regulation | 3 | 5 | Built to constant current | mA | ||||||
| Line Regulation | 4 | 5 | Built to constant current | mA | ||||||
| Temperature drift | 0.1%/degC | % | ||||||||
| Efficiency | 90% full load | Built to constant current | ||||||||
| Protection | ||||||||||
| Constant Current Prot'n | CCP | At 16VDC<vout<44VDC | ||||||||
| open Voltage Protection(vout max=46V) | ||||||||||
| Over Temperature Prot'n | OTP | At Ta >60OC, rated power operation | ||||||||
| Physical | ||||||||||
| Dimension | H X W X L | 18X32X48 | Gen Tol : /-1.0mm | mm | ||||||
| Description | adapter with plastic t*e (DC) | |||||||||
| Gurantees | ||||||||||
| Lifetime | 3years @40degC, 15VDC-26VDC, 100%Load | |||||||||
| *T* : | ||||||||||
| 1. Throughout Vin range. Vout must be measured as near as possible to power supply. | ||||||||||
| 2. Throughout Io range (Io = output current). | ||||||||||
| 3. Vout deviation as Io varies from Io(min) ~ Io(rated). | ||||||||||
| 4. Vout deviation as Vin varies from 15 ~ 24Vdc. | ||||||||||
| 5. Noise & ripple measured at the power supply's dc header, terminated with 100uF E-cap in parallel | ||||||||||
| with 0.1uF F-cap. Oscilloscope bandwidth - 100MHz. Oscilloscope probe connected with | ||||||||||
| 50ohm cable and terminated with matching impedance at oscilloscope input jack (EIAJ standard). | ||||||||||
是
GRE
LNS-45V-25W
0.65（A）
15-26VDC（V）
15-45VDC（V）
30W（W）
