AVAGO 高速光耦 HCPL-4503-560E

HCPL-4503-560E

HCPL-4503-560E

HCPL-4503-560E

HCPL-4503-560E

Description

These diode-transistor optocouplers use an insulating

layer between a LED and an integrated photodetector to

provide electrical insulation between input and output.

Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler

by reducing the base-collector capacitance.

These single channel optocouplers are available in

8-Pin DIP, SO-8 and Widebody package configurations.

The HCPL-4502/4503 and HCNW4502/4503 are designed

for high speed TTL/TTL applications. A standard 16 mA TTL

sink current through the input LED will provide enough

output current for 1 TTL load and a 5.6 kΩ pull-up resistor.

CTR for these devices is 19% minimum at IF=16mA.

Functional Diagram

A 0.1 μF bypass capacitor must be connected between pins 5 and 8.

HCNW4502/3

HCPL-0452/0453/4502/4503

Single Channel, High Speed Optocouplers

Data Sheet

Features

• 15 kV/μs minimum common mode transient

immunity at VCM = 1500 V

• High speed: 1 Mb/s

• TTL compatible

• Available in 8-Pin DIP, SO-8, widebody packages

• Open collector output

• Guaranteed performance from temperature:

0°C to70°C

• Safety approval

UL Recognized – 3750 Vrms for 1 minute (5000 Vrms

for 1 minute for HCNW and Option 020 devices)

per UL1577

CSA Approved

IEC/EN/DIN EN 60747-5-5 Approved

– VIORM = 630 V peak for HCPL-4503#060

– VIORM = 1414 V peak for HCNW devices

• Dual channel version available (4534/0534)

• MIL-PRF-38534 hermetic version available

(55XX/65XX/4N55)