供应LP4070E 微源300mA独立线性充电器

LPSemi/微源半导体 LP4070E TDFN-6 300mA独立线性锂离子电池充电器

General Description

The LP4070E is a complete constant-current/constant-voltagelinear charger for single cell lithium-ion batteries. Its TDFN-6package and low external component count make the LP4070Eideally suited for portable applications. Furthermore, the deviceoperates from either a USB port or AC adapter. Due to theinternal MOSFET architecture,No external sense resistor isneeded and no blocking diode is required.Thermal feedbackprevents overheating by regulating the charge current to limitthe die temperature during high power operation or highambient temperature conditions.The charge voltage is preset at4.2V/4.35V and the charge current can be programmed up to300mA externally with a single resistor. The LP4070Eautomatically terminates the charge cycle when the chargecurrent drops to 10% programmed value after the final floatvoltage is reached. When the input supply (wall adapter or USBsupply) is removed, the LP4070E automatically enters a lowcurrent state, dropping the battery drain current to less than 1μA.Other features include charge current monitor, automaticrecharge and charge status indications.

Features

◆ Operating input voltage from 3.9 V to 6 V

◆ Programmable Charge Current Up to 300mA

◆ No MOSFET, Sense Resistor or Blocking Diode Required

◆ Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating

◆ Preset 4.2V/4.35V Charge Voltage with ±1% Accuracy

◆ Reverse Leakage Protection Prevents Battery Drainage

◆ Low Battery Leakage Current (less than 1 μA)

◆ 2.9V Trickle Charge Threshold

◆ Automatic Recharge

◆ C/10 Charge Termination

◆ Output OCP

◆ Available in a Low Profile TDFN-6 (1*1mm) Package

Applications

◆ Portable Media Players/MP3 players

◆ Cellular and Smart mobile phone

◆ PDA/DSC

◆ Bluetooth Applications

产品规格书（部分）