供应MX30LF2G18AC-XKI-NAND闪存

一般的描述
MX30LFxG18AC是2Gb/4Gb SLC NAND闪存设备。它的标准NAND闪存功能
和可靠的质量，典型的P/E周期100K(带主机ECC)，这使它zui适合嵌入式
系统代码和数据存储。
产品系列要求每(512+16)B 4位ECC。
对于读取和程序操作，MX30LFxG18AC通常以2,112字节的页面访问。
MX30LFxG18AC数组组织为数千块，由64页(2048 +64)组成。
两个NAND字符串结构中的字节，每个字符串中有32个串行连接的单元。每一页都有一个附加页
64字节用于ECC和其他目的。该设备有一个2,112字节的片上缓冲区用于数据加载和
访问。
MX30LFxG18AC的Cache Read Operation使di一个字节读访问时延为25us，顺序读为20ns，将下一个顺序页的延从tR缩短为tRCBSY。
MX30LFxG18AC功耗为30mA在所有操作模式(读/程序/擦除)，
备机模式为50uA。

FEATURES
2G/4G-bit SLC NAND Flash
  Bus: x8
  Page size: (2048+64) byte,
  Block size: (128K+4K) byte,
  Plane size:
1024-block/plane x 2 for 2Gb
2048-block/plane x 2 for 4Gb
ONFI 1.0 compliant
Multiplexed Command/Address/Data
User Redundancy
   64-byte attached to each page
Fast Read Access
  Latency of array to register: 25us
  Sequential read: 20ns
Cache Read Support
Page Program Operation
  Page program time: 300us( typ.)
Cache Program Support
Block Erase Operation
   Block erase time: 1ms (typ.)
Single Voltage Operation:
  VCC: 2.7 ~ 3.6V
Low Power Dissipation
   Max. 30mA
 Active current (Read/Program/Erase)
Sleep Mode
   50uA (Max) standby current

Hardware Data Protection: WP# pin
Block Protection
   PT (Protection) pin: active high at power-on,
which protects the entire chip. The pin has an
internal weak pull down.
  Temporary protection/un-protection function
(enabling by PT pin)
   Solid protection
(enabling by PT pin)
Device Status Indicators
  Ready/Busy (R/B#) pin
  Status Register
Chip Enable Don't Care
   Simplify System Interface
Unique ID Read support (ONFI)
Secure OTP support
High Reliability
  Endurance: typical 100K cycles (with 4-bit ECC
per (512+16) Byte)
  Data Retention: 10 years
 Wide Temperature Operating Range
  40°C to +85°C
 Package:
 1) 48-TSOP(I) (12mm x 20mm)
 2) 63-ball 9mmx11mm VFBGA
All packaged devices are RoHS Compliant and
Halogen-free.