特点
Feature
*体积小，容量大，适合自动安装的卷（编）带包装。
Miniature size, large capacitance, tape and reel packaging suitable for auto-placement
*环氧树脂封装，从而具有优良的*潮性能、机械强度及耐热性。
Epoxy resin coating creates excellent performance in humidity resistance, mechanical strength and heat resistance
*工业生产标准尺寸及多种脚型产品。
Standard size, various lead configuration 介质种类
Dielectric T*e | I类介质
Cl* I | II类介质
Cl* II | 介质材料
Dielectric Material | 温度补偿型
Temperature Compensating | X7R/X5R(B) | Z5U(E) | Y5V(Y/F) | 电气性能
Electrical Properties | 电气性能*稳定，几乎不随温度、电压和时间的变化而变化。
The electrical properties is the most stable one and has little change with temperature, voltage and time. | 具有较高的介电常数，容量可做到比I类电容器高，具有稳定的温度特性。
X7R material has high dielectric constant, and its capacitance is higher than cl* I. These capacitors are cl*ified as having a semi-stable T.C.. | 温度特性介于X7R和Y5V之间，容量稳定性相对较差，对温度、电压等条件较敏感。
Temperature characteristic is between that of X7R and Y5V. The capacitance is unstable and sensible to temperature and voltage. | 介电常数*大，但温度特性较差，对温度、电压等条件较敏感。
Y5V material has highest dielectric constant. Its capacitance and dissipation is sensible to temperature and voltage. | 应用
Application | 适用于低损耗，稳定性要求高的高频电路，如滤波器、振动器和计时电路等。
Used in applications where low-losses and high-stability are required, such as filters, oscillators, and timing circuits so on. | 适用于容量范围广，稳定性要求不高的电路中，如隔直、耦合、旁路及鉴频等电路中。
Used over a wide temperature range , such in these kinds of circuits, DC-blocking, coupling, b**ing, frequency discriminating etc. | 适用于要求大容量，使用温度范围接近于室温的旁路、耦合等，及低直流偏压电路中。
Ideally suited for b**ing and coupling application circuits operating with low DC bias in the environment approaching to room temperature. | 适用于要求大容量，温度变化不大的电路中
Used over a moderate temperature range in application where high capacitance is required. | 容量范围
Available capacitance range | 0.5pF~0.1uF | 100pF~22uF | 1nF~10uF |
订货代码
Ordering Code *4 - 0805 Y 104 M 500 P F3 ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ A B C D E F G H
尺寸、工作电压及容量关系表
Size Code and Voltage VS Capacitance
• 其它规格可直接和我们联系。 • Others are available, Contact yuexing.
通用型引线MLCC*性及测试方法
Reliability and Test Method for General Leaded MLCC
以上所示“标准条件”解释如下： 温度：5~35℃， 湿度：45~85%， 气压：86~106kPa * Note on standard condition: " standard condition " referred to herein should be defined as follows: 5 to 35℃ of temperature, 45 to 75% of relative humidity, and 86 to 106kPa of atmospheric pressure. 若测试结果有争议时，仲裁试验用标准大气条件为： 温度：25&plu*n;1℃， 相对湿度：48%~52%， 气压：86~106kPa * When there are questions concerning measurement results: In order to provide correlation data, the test should be conducted under a condition of 25 degrees plus/minus 1 centigrade of temperature, 48% through 52% of relative humidity and 86 through 106 kPa of atmospheric pressure. 包装形式 Packaging Style
注意Note： P1=3.85mm for F=5.08mm；P1=5.1mm for F=2.54mm.
| 
