ADI仪表放大器AD8226ARMZ-R7功能

ADI仪表放大器AD8226ARMZ-R7功能

制造商零件编号：
AD8226ARMZ-R7
制造商:
Analog Devices
说明：
仪表放大器 Wide Supply Range PREC RRO IC
规格
产品种类: 仪表放大器
制造商: Analog Devices Inc.
系列: AD8226
通道数量: 1 Channel
GBP-增益带宽产品: -
SR - 转换速率 : 0.4 V/us
CMRR - 共模抑制比: 120 dB
Ib - 输入偏流: 35 nA
Vos - 输入偏置电压 : 100 uV
最大输入电阻: 800 MOhms at +/- 15 V
电源电压-最大: 36 V
电源电压-最小: 2.2 V
工作电源电流: 325 uA
最大工作温度: + 125 C
最小工作温度: - 40 C
封装 / 箱体: MSOP-8
3dB带宽: 1.5 MHz
放大器类型: Instrumentation Amplifier
商标: Analog Devices
双重电源电压: 1.35 V to 18 V
增益V/V: 1 V/V to 1000 V/V
高度: 0.85 mm
长度: 3 mm
工作电源电压: 2.2 V to 36 V
产品: Instrumentation Amplifiers
工厂包装数量: 1000
电源类型: Single, Dual
Vcm - 共模电压: 2.2 V to 36 V
电压增益 dB: 60 dB
宽度: 3 mm
单位重量: 140 mg
FEATURES
Gain set with 1 external resistor
Gain range: 1 to 1000
Input voltage goes below ground
Inputs protected beyond supplies
Very wide power supply range
Single supply: 2.2 V to 36 V
Dual supplies: ±1.35 V to ±18 V
Bandwidth (G = 1): 1.5 MHz
CMRR (G = 1): 90 dB minimum for BR models
Input noise: 22 nV/√Hz
Typical supply current: 350 μA
Specified temperature: −40°C to +125°C
8-lead SOIC and MSOP packages
APPLICATIONS
Industrial process controls
Bridge amplifiers
Medical instrumentation
Portable data acquisition
Multichannel systems 
GENERAL DESCRIPTION
The AD8226 is a low cost, wide supply range instrumentation
amplifier that requires only one external resistor to set any gain
between 1 and 1000.
The AD8226 is designed to work with a variety of signal
voltages. A wide input range and rail-to-rail output allow the
signal to make full use of the supply rails. Because the input
range also includes the ability to go below the negative supply,
small signals near ground can be amplified without requiring dual
supplies. The AD8226 operates on supplies ranging from ±1.35 V
to ±18 V for dual supplies and 2.2 V to 36 V for single supply.
The robust AD8226 inputs are designed to connect to realworld
sensors. In addition to its wide operating range, the
AD8226 can handle voltages beyond the rails. For example,
with a ±5 V supply, the part is guaranteed to withstand ±35 V
at the input with no damage. Minimum as well as maximum
input bias currents are specified to facilitate open wire detection.
The AD8226 is perfect for multichannel, space-constrained
industrial applications. Unlike other low cost, low power
instrumentation amplifiers, the AD8226 is designed with
a minimum gain of 1 and can easily handle ±10 V signals.
With its MSOP package and 125°C temperature rating, the
AD8226 thrives in tightly packed, zero airflow designs.
The AD8226 is available in 8-lead MSOP and SOIC packages,
and is fully specified for −40°C to +125°C operation.
For a device with a similar package and performance as the
AD8226 but with gain settable from 5 to 1000, consider using
the AD8227.