供应3M MU14-187DFHT

Scotchlok®Terminals
MU14-187DFHT, MU14-250DFHT
Female Disconnect, High Temperature,
Non Insulated, Butted Seam.

?557 IDC*  560B IDC  972 IDC  
Application: Electrically connects two  Application: Electrically connects a  Application: Used to install a blade  
wire ends and insulates the connection.  (tap) wire end to a through (run) wire  t*e automotive fuse between power  
• Designed for control circuit wiring,  and insulates the connection.  source and device.  
fixture wiring, appliance wiring,  • For general-purpose electrical  • Self-stripping.  
signal and PA systems,  connections on auto, boat, van or  • In-line fuse holder.  
automotive/boat/RV wiring. • Flame retardant.  trailer. • Used for tap and parallel splicing.  951, 952, & 953 IDCs  
• Used for *tail splicing. • Rated up to 600 volts. 567 562  804 804U 560B  Application: Used to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with 3M 0.250" (6,35 mm) male  
tabs, making a quick-connect wiring  
558  connection.  
• Flame retardant.  
558 IDC* 557  804 & 804U IDCs  • Used for tap splicing. 951  
Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. • Designed for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems, automotive/boat/RV wiring. • Flame retardant. • Used for tap splicing. • Rated up to 600 volts.  Application: Electrically connects a (tap) wire end to a through (run) wire; insulates and provides a moisture-resistant seal for the connection. The 804 connector is greased while the 804U connector is ungreased. • Sealant-filled connector is suitable for RV trailers, boats, fleet vehicles and other environmentally sensitive applications where corrosive elements such as  UB2A & UB2A-D IDCs Application: UB2A makes a moisture-resistant butt splice connection between two solid-copper conductors of air-core or filled cable. 952 953  
562 IDC Application: Electrically connects a (tap) wire end through a (run) wire and insulates the connection.  road chemicals, salt spray and exhaust fumes might be encountered. • Used for tap splicing.  UB2A-D connector makes a dry connection. • Sealant is a mineral oil-based grease. UR  
• Self-stripping.  972 905  UP2  
• Used for tap splicing.  UR2-D  
Color: Yellow  
901  
560 & 560N IDCs  
Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection.  901 IDCs Application: Electrically taps into a wire in mid-span without cutting  UG IDC UG ULG UP3  
• Flame retardant. • Used for tap and parallel splicing. 560 564  or stripping the wire. Connector then mates with a 0.156" (4,0 mm) male snap plug, making a disconnectable connection. • Designed for quick connect/disconnect of electrical systems on pull-behind vehicles  Application: Makes a moisture-resistant tap splice connection between two solid-copper conductors of air-core or filled cable. • Sealant is a mineral oil-based grease.  
560N  such as rental trailers, boats and  UR2 & UR2-D IDCs  
564 IDC Application: Electrically connects two through (run) wires and insulates the  campers. • Used for tap splicing. 905 & 905N IDCs  Application: UR2 connector makes a moisture-resistant butt splice connection between three solid-copper  
connection. • Used for parallel splicing. 567 IDC  Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection.  conductors of air-core or filled cable. UR2-D connector makes a dry connection.  
Application: Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. • Flame retardant. • Self-stripping. • Used for tap splicing. Color: Brown *Also tested in accordance with UL  • Suitable for low-voltage accessories such as radios, stereo speakers, tape decks and CB radios. • Used for tap, in-line parallel and *tail splicing.  UY2 & UY2-D IDCs Application: UY2 connector makes a moisture-resistant butt splice connection between two solid-copper conductors of air-core or filled cable. UY2-D connector makes a dry  
Standard for Portable Electric Lamps, UL 153 section 15, when housed  connection. • Sealant is a mineral  
within the body of the lamp.  oil- based grease.