图文详情
产品属性
相关推荐
Features
• Open NAND Flash Interface (ONFI) 1.0-compliant
• Single-level cell (SLC) technology
• Organization
– Page size:
• x8: 2,112 bytes (2,048 + 64 bytes)
• x16: 1,056 words (1,024 + 32 words)
– Block size: 64 pages (128K + 4K bytes)
– Device size: 2Gb: 2,048 blocks
• READ performance
– Random READ: 25μs
– Sequential READ: 25ns (3.3V)
– Sequential READ: 35ns (1.8V)
• WRITE performance
– PROGRAM PAGE: 220μs (TYP, 3.3V)
– PROGRAM PAGE: 300μs (TYP, 1.8V)
– BLOCK ERASE: 500μs (TYP)
• Data retention: 10 years
• Endurance: 100,000 PROGRAM/ERASE cycles
• First block (block address 00h) guaranteed to be
valid with ECC when shipped from factory1
• Industry-standard basic NAND Flash command set
• Advanced command set:
– PROGRAM PAGE CACHE MODE
– PAGE READ CACHE MODE
– One-time programmable (OTP) commands
– BLOCK LOCK (1.8V only)
– PROGRAMMABLE DRIVE STRENGTH
– READ UNIQUE ID
• Operation status byte provides a software method of
detecting:
– Operation completion
– Pass/fail condition
– Write-protect status
• Ready/busy# (R/B#) signal provides a hardware
method of detecting operation completion
• WP# signal: write protect entire device
• RESET required as first command after power-up
• INTERNAL DATA MOVE operations supported
• Alternate method of device initialization
(Nand_Init) after power up4 (Contact Factory)
Figure 1: 63-Ball VFBGA
1. See “Error Management” on page 61.
2. For part numbering and markings, see
Figure 2 on page 2 and Figure 3 on page 3.
3. CPL = center parting line
4. Available only in 1.8V VFBGA package.
Options
• Density2: 2Gb (single die)
• Device width: x8, x16
• Configuration:
# of die # of CE# # of R/B# I/O
1 1 1 Common
• VCC: 2.7–3.6V
• VCC: 1.65–1.95V
• Package
– 48-pin TSOP type I CPL3 (lead-free plating, 3.3V
only)
– 63-ball VFBGA (lead-free, 1.8V only)
• Operating temperature:
– Commercial (0°C to +70°C)
– Extended (–40°C to +85°C)
MT29F2G08ABAEAWP-IT:E
- 40 C to +85 C
2.7 V ~ 3.6 V
2Gb (256M x 8)
48-TSOP