批量生产led led灯珠 led贴片 3528贴片 5-6LM

产品型号：351WD12LGC30

光通：5-6lm

光强：0mcd

电压：3.0-3.2-3.4V

光源颜色：正白，暖白，冷白

色系色温：色温可定制，也可看样定做！

光衰：1000H常温下小于4%

请*我们的包装方式和标签！

请*我们的外包装和标签！

测试环境（远光的测试仪和星光的老化仪）！

贴片卷盘（3528 2K一卷）

Soldering

Reflow Soldering			Hand Soldering
	Lead Solder	Lead – free Solder
Pre-heat	120~150℃	180~200℃	Temperature	350℃Max.
Pre-heat time	120sec. Max.	120sec. Max.	Soldering time	3sec. Max.
Peak temperature	240℃Max.	260℃Max.		(one time only)
Soldering time	10sec. Max.	10sec. Max.
Condition	refer to	refer to
	Temperature-	Temperature-
	profile 1	profile 2

*After reflow soldering rapid cooling should be avoided.

[Temperature-profile (Surface of circuit board)]

Use the conditions shown to the under figure.

＜1 : Lead Solder＞＜2 : Lead-free Solder＞

[ Recommended soldering pad design ]

Use the following conditions shown in the figure.

Handling of Silicone Resin LEDs

Handling Indications

During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all t*es should not be used to pierce the sealing compound

Figure 1

In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched.

Figure 2

When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented.

This is *ured by choosing a pick and place nozzle which is larger than the LED’s reflector area.

Dimensions for Tape

Dimensions for Reel

Notes:

1.All dimensions are in mm, tolerance is&plu*n;2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

Packing

Notes:

1.All dimensions are in mm, tolerance is&plu*n;2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

贴片SMD3014 3020 3528 3535 5050*生产供应商，工厂成立十多年，现共有三家工厂，专为灯条，模组，灯具厂家研发*高质量的灯珠！*不用担忧货源找不到，质量找不好，价格谈不拢的问题。你的选择您的满意。欢迎来电咨询与免费索样。供深圳工厂贴片生产线给大家参考，实物拍摄，盗图*究！

"

品牌/商标

毅远

型号/规格

3528单晶

加工定制

是

安装方式

按客户要求

亮度

*亮

使用环境

室内

显示方式

静态显示

显示颜色

单色

像素直径

35*28（mm）

封装工艺

贴片式

功率

0.06

供电电压

3.0-3.2-3.4

种类

LED背光源