代理JST原厂连接器端子针座现货
地区：广东 深圳
认证：
无
图文详情
产品属性
相关推荐
现货代理原厂JST端子胶壳插头接插件线束。现货库存多单价好交货及时快捷订货周期快，处事灵活，欢迎咨询下单！
JST针座板对板连接器：
| 1 | 0.4 mm pitch |  | Series | JAL connector | -> Detail | |
| T*e | Shrouded header t*e, PC board parallel mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| SMT configuration 0.4mm pitch board-to-board connector with 4-row staggered leads that are located just below the surface of the wafer. With the CSP (chip size package) technology, mounting area on the board is minimized. | ||||||
| 2 | 0.4 mm pitch |  | Series | JAN connector | -> Detail | |
| T*e | Shrouded header t*e, PC board parallel mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| This JAN connector is a board-to-board connector with stacking height 1.0mm and 0.4mm pitch, which is the lowest-profile connector in the [electro mechanical component] industry. In consideration of operability at user side, although it is 1.0mm low profile, when mating receptacle with plug, the connector structure, where the large amount of guiding connector can be taken, is adopted, and differentiates JAN connector added value. | ||||||
| 3 | 0.4 mm pitch |  | Series | JAS connector | -> Detail | |
| T*e | Shrouded header t*e, PC board parallel mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *The plug housing consists of two separate parts. This allows the connector to be put under greater torsion strain than similar connectors without any damage being given to the solder joints. *Both plug and receptacle have the double I t*e solder tabs, which reduces the stress by the distored mating/unmating applied to the solder tails. | ||||||
| 4 | 0.4 mm pitch |  | Series | J* connector | -> Detail | |
| T*e | Shrouded header t*e, PC board parallel mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| 0.4mm pitch, SMT, low-profile connection with parallel connection. | ||||||
| 5 | 0.5 mm pitch |  | Series | JMC connector | -> Detail | |
| T*e | Full automatic IDC machine, Compact t*e, Space saving mountable, PC board parallel or perpend icular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *This JMC connector is 0.5mm pitch SMT t*e board-to-board connector with selection of boss existence. Comparing with conventional JMC connector, more *all and space saving are realized. | ||||||
| 6 | 0.5 mm pitch |  | Series | JMD connector | -> Detail | |
| T*e | Shrouded header t*e, PC board parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *Box-shaped plug housing has guide ribs on both ends, which prevents distortion. *No. of circuits available are from 20 to 100, every 10 circuits | ||||||
| 7 | 0.6 mm pitch |  | Series | JU connector | -> Detail | |
| T*e | Shrouded header t*e, PC board horizontal, parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| This JU connector is a board-to-borad connector which has many circuits such as Maximum 200 circuits. *Fully shrouded box style design Its mating portion is designed with a full shrouded box style which prevents the contamination of splashed flux. | ||||||
| 8 | 0.6 mm pitch |  | Series | JUX connector | -> Detail | |
| T*e | Shrouded header t*e, Compact t*e, PC board parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| This connector is *all 0.6mm pitch double-row board-to-board connector for high density mounting. This plug is available in * and side entry t*e to choose either connection t*e depending on its usage. | ||||||
| 9 | 0.635 mm pitch |  | Series | HTB connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board perpendicular mounting t*e, Absorbing PC board misalignment t*e, PC board horizontal mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| This HTB connector is 0.635mm pitch SMT t*e board-to-board connector with parallel and perpendicular connection. | ||||||
| 10 | 0.8 mm pitch |  | Series | CRK connector | -> Detail | |
| T*e | For Craidles | |||||
| Rate(AC/DC) |
| |||||
| The CRK connector is the ultra *all connector with the shutter for cradles. This is suitable for using to the cradle of mobile equipments such as mobile phone, PDA and so on. This is suitable for using to the cradle of mobile equipments such as mobile phone or PDA | ||||||
| 11 | 0.8 mm pitch |  | Series | JFC connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board parallel mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| This 0.8mm pitch connector is developed for the car audio industry and is able to compensate for misalignment of up to 0.5mm on all three dirctions of X, Y and Z axes between the plug and receptacle when they are mating. *Realized current rating of 1.3A | ||||||
| 12 | 1.0 mm pitch |  | Series | RHM connector | -> Detail | |
| T*e | Shrouded header t*e, PC board parallel mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| The plug consists of upper and lower parts in order to save space. This connector enables also flexible application by using either upper or lower parts individually. | ||||||
| 13 | 1.25 mm pitch |  | Series | 1.25FJ connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *Low profile Only 5.0mm in mounting height *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. | ||||||
| 14 | 1.25 mm pitch |  | Series | 1.25FJ-N connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e , For long distance between two PC board | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *Low profile Only 5.0mm in mounting height *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. | ||||||
| 15 | 1.25 mm pitch |  | Series | JE connector | -> Detail | |
| T*e | Shrouded header t*e, PC board perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *High presure, dual beam, fork contact *Box-shaped housing | ||||||
| 16 | 1.25 mm pitch |  | Series | JED connector | -> Detail | |
| T*e | Shrouded header t*e, Double-row, PC board parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *Double-row construction *High presure, dual beam, fork contact *Box-shaped housing | ||||||
| 17 | 1.25 mm pitch |  | Series | JET connector | -> Detail | |
| T*e | With locking device, PC board perpendicular mounting t*e, With staggered solder tails | |||||
| Rate(AC/DC) |
| |||||
| Self-supporting style board-to-board connectors. *Both secure lock and friction lock t*e receptacles are available. *The connector halves can be easily mated, yet have a high retention force because of the housing lock mechani*. | ||||||
| 18 | 1.5 mm pitch |  | Series | 1.5FJ connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. *High-retention zigzag fork contacts | ||||||
| 19 | 1.5 mm pitch |  | Series | HQB connector | -> Detail | |
| T*e | Hinge t*e, Absorbing PC board misalignment t*e, PC board parallel or perpendicular mounting t*e, With staggered solder tails | |||||
| Rate(AC/DC) |
| |||||
| Hinge t*e board-to-board connectors which allow mated PCB's to move 90 degrees in respect to one another while electricity is turned on. *Flexible connection absorbs slight misalignment between boards, laterally or perpendicularly up to 0.5mm. | ||||||
| 20 | 1.5 mm pitch |  | Series | HQM connector | -> Detail | |
| T*e | Hinge t*e, Absorbing PC board misalignment t*e, PC board parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| Hinge t*e board-to-board connectors which allow mated PCBs to move 90 degrees in respect to one another while electricity is turned on. *The hinge compensates for slight misalignments between circuit boards, even if the boards are laterally or perpendicularly out of line up to 0.5mm. | ||||||
| 21 | 1.5 mm pitch |  | Series | JDF connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| This 1.5mm pitch board-to-board connector has achieved further miniaturization in width by adopting a triple row structure. The connector is also equipped with a floating mechani* which absorbs misplacement when mounted to the board and misalignment when *embled. | ||||||
| 22 | 1.5 mm pitch |  | Series | JDV connector | -> Detail | |
| T*e | With locking device, PC board perpendicular mounting t*e, With staggered solder tails | |||||
| Rate(AC/DC) |
| |||||
| *Staggered solder tails *Two t*es of locking devices (secure lock t*e & friction lock t*e) are available. | ||||||
| 23 | 2.0 mm pitch |  | Series | FJ connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. *High-retention zigzag fork contacts | ||||||
| 24 | 2.0 mm pitch |  | Series | FJ-K connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e , For long distance between two PC board | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *Long t*e *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. *High-retention zigzag fork contact | ||||||
| 25 | 2.0 mm pitch |  | Series | FJ-L connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e , For long distance between two PC board | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *Long t*e *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. *High-retention zigzag fork contact | ||||||
| 26 | 2.0 mm pitch |  | Series | FJ-V connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e , For long distance between two PC board | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *Long t*e *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. *High-retention zigzag fork contact | ||||||
| 27 | 2.0 mm pitch |  | Series | HQF connector | -> Detail | |
| T*e | Hinge t*e, Absorbing PC board misalignment t*e, PC board parallel or perpendicular mounting t*e, With staggered solder tails | |||||
| Rate(AC/DC) |
| |||||
| Hinge t*e board-to-board connectors which allow mated PCBs to move 90 degrees in respect to one another while electricity is turned on. *Flexible connection absorbs slight lateral misalignment between boards. | ||||||
| 28 | 2.0 mm pitch |  | Series | MQ connector | -> Detail | |
| T*e | Shrouded header t*e, Compact t*e, PC board parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *Back-up support spring construction *The shrouded header has three side walls to ease insertion of the receptacle. | ||||||
| 29 | 2.5 mm pitch |  | Series | 2.5FJ connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. *High-retention zigzag fork contacts | ||||||
| 30 | 2.5 mm pitch |  | Series | 2.5FJ-N connector | -> Detail | |
| T*e | Absorbing PC board misalignment t*e, PC board horizontal mounting t*e , For long distance between two PC board | |||||
| Rate(AC/DC) |
| |||||
| Its plug consists of a unique flexible hinge that absorbs circuit board misalignment. *The flexible construction of the plug allows it to be mated after its PC boards are mounted in their enclosures. *High-retention zigzag fork contacts | ||||||
| 31 | 2.5 mm pitch |  | Series | HVQ connector | -> Detail | |
| T*e | With locking device, PC board horizontal, parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *Used to interconnect PC boards in parallel, vertically or horizontally. *Folded beam construction *Molded-in header | ||||||
| 32 | 2.5 mm pitch |  | Series | JL connector | -> Detail | |
| T*e | Shrouded header t*e, With locking device, PC board perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *High contact pressure *Housing lock *ures good connection even after severe shock & vibration. Both secure lock and friction lock connectors are available. | ||||||
| 33 | 2.5 mm pitch |  | Series | JQ connector | -> Detail | |
| T*e | Shrouded header t*e, PC board horizontal, parallel or perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| *High contact pressure *Fully shrouded header *The header is interchangeable with those of crimp style XH connector and insulation displacement NR/NRD connectors. | ||||||
| 34 | 2.5 mm pitch |  | Series | MBS header | -> Detail | |
| T*e | PC board perpendicular mounting t*e | |||||
| Rate(AC/DC) |
| |||||
| Headers for board-to-board connection *Staggered pins *The MBS header has a locking boss that alloes it to be temporarily mounted on the PC board. | ||||||
| 35 | 2.54 mm pitch |  | Series | DIN connector | -> Detail | |
| T*e | Conformed to DIN standard | |||||
| Rate(AC/DC) |
| |||||
| Conforms to DIN standards. *The receptacle housing has a locking device to securely hold the plug housing. *Hook pins to *ure connection of the boards. | ||||||
JST/压着端子
HRP-02-S
通讯
排针/排母/排线
IDC
多合一
SD
条形
熔接
*潮
尼龙
CU
N
N
