供应FH12-15S-0.5SH，15位，0.5mm间距，1.0mm高

FH12系列特性：

0.5mm and1mmPitch Connectors For FPC/FFC

[1]Features

1. Ease of Use and Space Savings

Only one finger or 6.9N (Newtons) of force is required

to lock Hirose’s rotational actuator (flip-lock) as

compared to using 2 fingers and 39.2N to close a

FFC/FPC connector from our competition.

The Flip-Lock design also allows customers to place 2

or more connectors side by side as there is no need to

waste additional board space for a side latch.

2. Strengthened Flip-lock Actuator

The standard Flip-Lock requires only2.0mmheight

above the board. A strengthened lock lever is available

which only requires an additional0.4mm.

3. Supports Thin FPC (0.18mm)

Hirose does not require double-sided FPC to have any

additional strengthening plate or stiffener and can

therefore support a thickness of as little as0.18mm+/-

0.05.

4. Hirose Ensures Reliability

Hirose’s patented half tuning fork contacts maintain

the required normal force without relying on the

connector housing. With our competitor’s conventional

products the housing walls support the contact force,

which does not provide for long-term reliability.

5. Prevention ofSolderBridge

Excess solder cavity absorbs excessive solder and

avoids solder bridging.

6. Three different assembly types

FH12 is offered in Top & Bottom Contact and Vertical

Mount and offered in both a0.5mmcontact pitch as

well as a1.0mmcontact pitch (bottom contact only).