开模定制串行液晶屏

供应可视编程LCD液晶屏  RS232接口LCD液晶屏 开模定制串行液晶屏

供应lcd液晶屏  可视化编程液晶屏  RS232接口液晶屏

外型尺寸：90.6x35.7x19.85
视域尺寸：60.2x18.0
点大小：0.40x0.40
点间距：0.44x0.44
控制器：SED1520 MCU
接口方式：RS232或I2C

The GM12232I-V02 comes equipped with the following features _ 122 x 32 pixel graphics display _ Text display using built in or user supplied fonts _ Contrast is adjustable by software control _ Backlighting is adjustable by software control _ Ke*ad interface _ RS-232 or I2C communications _ Extended voltage module available (-V). This module is equipped with a constant current source to ensure consistency in backlight brightness from unit to unit. Since this module has a voltage regulator, the contrast with remain consistent, regardless of the input voltage. The input voltage must be between 7-15 Volts for this module to operate.  This manual describes the basic use and overview of the display. It also describes advanced functions, which may require soldering. We expect the user to be proficient with a soldering iron before attempting to modify the unit. Please be advised any damage resulting from soldering irons or modifications will not be covered under the Manufacturer's Warranty.

The GM12232I-V02 is designed as the display unit for an *ociated controller. The controller may be anything from a single board, special purpose micro-controller to a PC, depending on the application. This controller is responsible for what is displayed on the screen of the display. The display provides a simple command structure to allow both text and graphics to be transferred to the screen. Text fonts, as well as graphics if desired, are stored in the display's flash ROM and may be regarded as 'permanent' in that they survive power-off periods and do not change unless explicitly reprogrammed. The screen is backlit for low-light situations. Backlighting may be turned up or down under program control. Contrast is software adjustable to compensate for differing lighting conditions and viewing angles.

此产品只作为定制产品的参考举例，而非标准产品。
    我公司可为广大客户开模制作各种根据自己的要求开发的TN LCD、HTN LCD、STN LCD、FSTN LCD产品。液晶屏工作温度可选择常温0℃-50℃、宽温-20℃- 70℃、*宽温-45℃- 80℃，连接方式可选择金属管脚、斑马纸、斑马条的方式,玻璃可以选择1.1毫米、0.7毫米、0.55毫米。开模时间短，开模费用低。产品价格合理、质量优良，可以降低您的采购成本,并*产品品质优良、稳定。产品广泛的应用于光阀、仪器仪表、数码产品、计算器、倒车雷达、保健仪、家用电器、仪器仪表、、遥控器、*设备、电力设备等多个领域。

      我公司生产的物美价廉的液晶屏（LCD）将使您的产品具有更大的竞争力。

：*山成  手机：
：
FAX：
https://www.good-lcd.com
MSN:dlwsc1971@hotmail.com
QQ: