freescale BDM仿真器USB-ML-12E USBMULTILINKBDME原装现货

USB-ML-12
P&E USB BDM Multilink Cable for the 68HC(S)12(X) and 68HCS08 and 68RS08 and ColdFire V1

P&E USB BDM Cable交互式转换接口(USB)

Windows 98SE/2000/XP/2003/Vista

• 支持Freescale 68HC(S)12(X)/68HCS08/68RS08/ColdFire V1
• 计算机USB接口 ( Windows 98SE/2000/XP/2003/Vista )
• 通过USB供电
• 目标板电压1.6V-5.25V
• 目标板频率32Khz-50Mhz
• 自动判断HCS08 设备的频率+全兼容能力
• 自动判断HC(S)12(X) 设备的频率
• 对RS08设备在RESET line生成烧写电压
• 无随机软件

USB BDM MULTILINK is a debug interface which allows a PC access to the Background Debug Mode (BDM) onFreescale HCS08, HC(S)12(X), RS08, and ColdFire V1 microcontrollers. It connects between a USB port on a Windows machine and the standard 6 pin “Berg” debug connector on the target.

By using the USB BDM MULTILINK, the user can take advantage of the background debug mode to halt normal processor execution and use a PC to control the processor. The user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external FLASH memory devices

The USB BDM MULTILINK works with P&E Microcomputer System's in-circuit debugger and flash programmer to allow debug and flash programming of the target processor. P&E has a set of interface libraries allowing the user to write their own Windows based application which interacts with P&E's debug interface.