UPD78F0513GB S-UES-A全新原装现货

型号：UPD78F0513GB S-UES-A

现货，原厂进口全新原装，假一赔十！

UPD78F0513

UPD78F0513

UPD78F0513

c)   SCK10      This is a serial clock I/O pin of serial interface CSI10. (d)   RxD0   This is a serial data input pin of serial interface UART0. (e)   RxD6   This is a serial data input pin of serial interface UART6. (f)    TxD0    This is a serial data output pin of serial interface UART0. (g)   TxD6   This is a serial data output pin of serial interface UART6. (h)   TI50   This is the pin for inputting an external count clock to 8-bit timer/event counter 50. (i)    TO50    This is a timer output pin of 8-it timer/event counter 50. (j)    TOH0,    TOH1    These are the timer output pins of 8-bit timers H0 and H1. (k)   INTP5   This is an external interrupt request input pin for which the valid edge (rising edge, falling edge, or both rising and falling edges) can be specified. 

Note   This is not mounted onto 38-pin products of the 78K0/KC2.  For the 38-pin products, be sure to set bits 6 and 7 of PM2 to “1”, and bits 6 and 7 of P2 to “0”. Remark√: Mounted, −: Not mounted The following operation modes can be specified in 1-bit units. (1)   Port   mode   P20  to  P27  function  as  an  I/O  port.    P20  to  P27  can  be  set  to  input  or  output  port  in  1-bit  units  using  port  mode  register 2 (PM2).