MMA8652FCR1 加速计 NXP

MMA8652FCR1

MMA8652FC, 3-Axis, 12-bit, Digital Accelerometer

The MMA8652FCR1 MMA8652FC is an intelligent, low-power, three-axis, capacitive micromachined accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable options, configurable to two interrupt pins. Embedded interrupt functions enable overall power savings, by relieving the host processor from continuously polling data. There is access to either low-pass or high-pass filtered data, which minimizes the data analysis required for jolt detection and faster transitions. The device can be configured to generate inertial wake-up interrupt signals from any combination of the configurable embedded functions, enabling the MMA8652FC to monitor inertial events while remaining in a low-power mode during periods of inactivity. The MMA8652FC is available in a small 10-pin DFN package (2 mm x 2 mm x 1 mm).

Features MMA8652FCR1

• 1.95 V to 3.6 V supply voltage

• 1.62 V to 3.6 V digital interface voltage

• ±2 g, ±4 g, and ±8 g dynamically selectable full-scale ranges

• Output Data Rates (ODR) from 1.56 Hz to 800 Hz

• 12-bit digital output

• I2C digital output interface with programmable interrupts

• Four embedded channels of configurable motion detection (Freefall, Motion, Pulse, Transient)

• Orientation (Portrait/Landscape) detection with programmable hysteresis

Typical applications MMA8652FCR1

• Tilt compensation in e-compass applications

• Static orientation detection (Portrait/Landscape, Up/Down, Left/Right, Back/ Front position identification)

• Notebook, tablet, e-reader, and laptop tumble and freefall detection

• Real-time orientation detection (virtual reality and gaming 3D user orientation feedback)