ST1S14PHR 开关稳压器 ST

ST1S14PHR

开关稳压器 Up to 3A Step Down 3A DC 5.5-48V 850Mhz

Up to 3 A step-down switching regulator

Description

The ST1S14PHR ST1S14 is a step-down monolithic power switching regulator able to deliver up to 3 A DC current to the load depending on the application conditions. The high current level is also achieved thanks to a HSOP8 package with exposed frame, that allows to reduce the Rth(JA) down to approximately 40 °C/W. The output voltage can be set from 1.22 V. The device uses an internal Nchannel DMOS transistor (with a typical RDS(on) of 200 mΩ) as the switching element to minimize the size of the external components. The internal oscillator fixes the switching frequency at 850 kHz. Power good open collector output validates the regulated output voltage as soon as it reaches the regulation. Pulse-by-pulse current limit offers an effective constant current short-circuit protection. Current foldback decreases overstress in a persistent short-circuit condition.

Features ST1S14PHR

• 3 A DC output current

• Operating input voltage from 5.5 V to 48 V

• 850 kHz internally fixed switching frequency

• Internal soft-start

• Power good open collector output

• Current mode architecture

• Embedded compensation network

• Zero load current operation

• Internal current limiting

• Inhibit for zero current consumption

• 2 mA maximum quiescent current over

temperature range

• 250 mΩ typ. RDS(on)

• Thermal shutdown

Applications ST1S14PHR

• Factory automation

• Printers

• DC-DC modules

• High current LED drivers