FS32K144HRT0CLHT 微控制器 NXP

地区:广东 深圳
认证:

深圳市中立信电子科技有限公司

金牌会员16年

全部产品 进入商铺

FS32K144HRT0CLHT

ARM微控制器 - MCU S32K144 32-bit MCU, ARM Cortex-M4F, 512kB Flash, 80MHz, 64KB RAM, 85 C, LQFP 64


Notes FS32K144HRT0CLHT

• The following two attachments are available with the Datasheet:

– S32K1xx_Orderable_Part_Number_ List.xlsx

– S32K1xx_Power_Modes_Configuration.xlsx

Key Features FS32K144HRT0CLHT

• Operating characteristics

– Voltage range: 2.7 V to 5.5 V

– Ambient temperature range: -40 °C to 105 °C for HSRUN mode, -40 °C to 125 °C for RUN mode

• Arm™ Cortex-M4F/M0+ core, 32-bit CPU

– Supports up to 112 MHz frequency (HSRUN mode) with 1.25 Dhrystone MIPS per MHz

– Arm Core based on the Armv7 Architecture and Thumb®-2 ISA

– Integrated Digital Signal Processor (DSP)

– Configurable Nested Vectored Interrupt Controller (NVIC)

– Single Precision Floating Point Unit (FPU)

• Memory and memory interfaces

– Up to 2 MB program flash memory with ECC

–64 KB FlexNVM for data flash memory with ECC and EEPROM emulation. Note: CSEc (Security) or EEPROM writes/erase will trigger error flags in HSRUN mode (112 MHz) because this use case is not allowed to execute simultaneously. The device will need to switch to RUN mode (80 MHz) to execute CSEc (Security) or EEPROM writes/erase.


– Up to 256 KB SRAM with ECC

– Up to 4 KB of FlexRAM for use as SRAM or

EEPROM emulation FS32K144HRT0CLHT

– Up to 4 KB Code cache to minimize performance

impact of memory access latencies

– QuadSPI with HyperBus™ support

• Mixed-signal analog

– Up to two 12-bit Analog-to-Digital Converter (ADC) with up to 32 channel analog inputs per module


– One Analog Comparator (CMP) with internal 8-bit

Digital to Analog Converter (DAC)



型号/规格

FS32K144HRT0CLHT

品牌/商标

NXP

内存大小

32位

数据 RAM 大小

64 kB

程序存储器大小

512 kB

ADC分辨率

12 bit

工作电源电压

2.7 V to 5.5 V