AT24C16C-XHM-T 存储器 Microchip

AT24C16C-XHM-T

I2C-Compatible (2-Wire) Serial EEPROM 16‑Kbit (2,048 x 8)

电可擦除可编程只读存储器 SERIAL 电可擦除可编程只读存储器 16K (2K X 8) 2-WIRE 1.7V

Features AT24C16C-XHM-T

• Low-Voltage Operation:

– VCC = 1.7V to 5.5V

• Internally Organized as 2,048 x 8 (16K)

• Industrial Temperature Range: -40°C to +85°C

• I2C-Compatible (2-Wire) Serial Interface:

– 100 kHz Standard mode, 1.7V to 5.5V

– 400 kHz Fast mode, 1.7V to 5.5V

– 1 MHz Fast Mode Plus (FM+), 2.5V to 5.5V

• Schmitt Triggers, Filtered Inputs for Noise Suppression

• Bidirectional Data Transfer Protocol

• Write-Protect Pin for Full Array Hardware Data Protection

• Ultra Low Active Current (3 mA maximum) and Standby Current (6 μA maximum)

• 16-Byte Page Write Mode:

– Partial page writes allowed

• Random and Sequential Read Modes

• Self-Timed Write Cycle within 5 ms Maximum

• ESD Protection > 4,000V

• High Reliability:

– Endurance: 1,000,000 write cycles

– Data retention: 100 years

• Green Package Options (Lead-free/Halide-free/RoHS compliant)

• Die Sale Options: Wafer Form

Packages AT24C16C-XHM-T

• 8-Lead PDIP, 8-Lead SOIC, 5-Lead SOT23, 8-Lead TSSOP, 8-Pad UDFN, 8-Pad XDFN and 8‑Ball VFBGA

Serial Data (SDA) AT24C16C-XHM-T

The SDA pin is an open-drain bidirectional input/output pin used to serially transfer data to and from the device. The SDA pin must be pulled-high using an external pull-up resistor (not to exceed 10 kΩ in value) and may be wire-ORed with any number of other open-drain or open-collector pins from other devices on the same bus.