供应电解电容

用于汽车电子产品

RT1 Series Type (系列)(фD≤8,1000H фD≥10,2000H) Electrical Requirements电解电容器规格书:1Capacitance Tolerance

容量偏差±20% at 120Hz,20℃2Operation Temperature

Range

工作温度6.3V~100V

-55℃~+105℃160~400V

-40~+105℃450V

-25℃~+105℃3Rated Working Voltage

And Surge Voltage

额定电压与

浪涌电压  W.V.6.3101625355063100160200250350400450 S.V.7.311.518.429405873115184230287400460517 4Leakage Current

漏电流  

6.3~100V160~450V

I≤0.01CV or 3μA(取较大值)

Whichever is greaterCV≤1000CV﹥1000I=0.1CV+40μA (1minute )

I=0.03CV+15μA (5minutes )I=0.04CA+100μA (1minute )

I=0.02CV+25μA (5minute )

Where       I=Leakage Current(μA)

           C=Capacitance(μF)

           V=Rated DC Working Voltage(V)

 5Dissipation Factor

损耗角正切值

(at 120Hz,20℃)  

Rated

Voltage6.3101625355063100160200250300400450 Tanδ(max)0.280.240.200.160.140.120.100.080.200.200.200.200.250.25 标称容量大于1000μF时，每增加1000μF，损耗角正切值增加0.02。

6Low Temperature Stability Lmpedance Ratio (MAX )Rated  Voltage6.3101625355063100160200250350400450Z(-25℃)/Z(+20℃)54322222334667Z(-40℃)/Z(+20℃)108643333448810-  

7Frequency (HZ )60(50)1205001k10k≤

Coefficient 0.47~1μF0.501.001.201.301.502.2~4.7μF0.651.001.201.301.5010~47μF0.801.001.201.301.50100~1000μF0.801.001.101.151.202200~33000μF0.801.001.051.101.15MULTIPLIER FOR RIPPLE CURRENT  

Endurance characteristic特性检测:NoItem测试项目Conditions测试条件Specification特性要求

1

Rotational

Temperature

Test

温度快速变化Capacitor is place in an oven whose temperatures follow specific regulation to change. The specific regulation is “+20℃(3 min)→-40℃(30 min)→+20℃(3 min)→+105℃(30 min)→+20℃(3 min)”,and it is called a cycle. The test totals 5 cycles. And then the capacitor shall be subjected to standard atmospheric Conditions for 16 hours, after which measurement shall be made.

电容器在规定的温度范围内循环如下：“+20℃(3 min)→-40℃(30 min)→  +20℃(3 min)→+105℃(30 min)→+20℃(3 min)”，以上循环运行5次后,将电容器放置于标准气候中恢复16小时测量其值满足特性要求。

Physical外观

No broken and undamaged

无可见损伤及泄漏

2

High

Temperature

Load Life Test

耐久性Capacitors shall be placed in oven with application of ripple current and rated voltage for 1000hrs（фD≥10,2000H）at 105℃.

在 105℃条件下，对电容器施加带有额定纹波电流的额定工作电压1000小时（фD≥10,2000H）后，在标准气候下恢复16小时测量。Capacitance

Change

容量变化Within±25% of the initial value

初始值的±25%以内TANδ

损耗角正切Less than 200% of specified value

不大于规定值的200%Leakage Current

漏电流Within specified value

不大于规定值Physical外观No broken and undamaged

无可见损伤及泄漏

3

High

Temperature

Unload Life Test

高温储存特性After 1000 hrs test at 105℃ without rated working voltage. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

将电容器无负载放置于105℃条件，1000小时后取出，按JIS C 5101-4，4.1项加压处理后测量。

.Capacitance

Change

容量变化Within±20% of the initial value

初始值的±20%以内TANδ

损耗角正切Lessthan200% of specified value

不大于规定值的200%Leakage Current

漏电流Less than 200% of specified value

不大于规定值的200%Physical外观No broken and undamaged

无可见损伤及泄漏