JCE100-EKS JCE200-EKS JCE300-EKS JCE400-EKS JCE500-EKS霍尔电流传感器

JCE100-EKS JCE200-EKS JCE300-EKS JCE400-EKS JCE500-EKS霍尔电流传感器

JCE-EKS 系列开环霍尔电流传感器 Open loop Hall current sensor

JCE-EKS 系列开环霍尔电流传感器的初、次级之间是绝缘的，用于控制、测量直
流、交流和脉冲电流。
JCE-EKS series current sensor is an open loop device based on the measuring
principle of the hall effect, with a galvanic isolation between primary and secondary
circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
产品特点 Products Features

安装方便
Easy mounting
体积小，节省空间
Small size and space saving
无插入损耗
No insertion losses
抗干扰能力强
High immunity to external interference
Low temperature drift

应用领域 Applications

交流变频调速器
AC variable speed drives
直流电机驱动静态转换器
Static converters for DC motor drives
通讯电源
Battery supplied applications
不间断电源 (UPS)
Uninterruptible Power Supplies
开关电源(SMPS)
Switched Mode Power Supplies
电焊机
Power supplies for welding applications

使用说明 Directions for use
1、当待测电流从传感器穿过，即可在输出端测得电压大小。(注意：错误的接线可能
导致传感器损坏)
When the current will be measured goes through a sensor, the voltage will be
measured at the output end.
(Note: The false wiring may result in the
damage of the sensor).
2、当输入电流导体完全充满初级孔径时动态表现（di/dt和响应时间）为最佳效果；
Dynamic performances (di/dt and response time) are best with a single bar completely
filling the primary hole.
3、可按用户需求定制不同额定输入电流和输出电压的传感器。

Custom design in the different rated input current and the output voltage are available.