嵌入式多媒体卡KLMAG1JETD-B041 eMMC

地区:广东 深圳
认证:

深圳市迅丰达电子科技有限公司

金牌会员3年

全部产品 进入商铺

嵌入式多媒体卡KLMAG1JETD-B041 eMMC


嵌入式多媒体卡KLMAG1JETD-B041 eMMC 的 关键特性:

·embedded MultiMediaCard Ver. 5.1 compatible.

·SAMSUNG eMMC supports features of eMMC5.1 which are defined in JEDEC Standard

- Supported Features : Packed command, Cache, Discard, Sanitize, Power Off Notification, Data Tag,

Partition types, Context ID, Real Time Clock, Dynamic Device Capacity, Command Queuing, Enhanced Strobe Mode,

Secure Write Protection, HS200, HS400, Field Firmware Update.

- Non-supported Features : Large Sector Size (4KB)

·Full backward compatibility with previous MultiMediaCard system specification (1bit data bus, multi-eMMC systems)

·Data bus width : 1bit (Default), 4bit and 8bit

·MMC I/F Clock Frequency : 0 ~ 200MHz

MMC I/F Boot Frequency : 0 ~ 52MHz

·Temperature : Operation (-25°C ~ 85°C), Storage without operation (-40°C ~ 85°C)

·Power : Interface power→VDD(VCCQ) (1.70V ~ 1.95V or 2.7V ~ 3.6V) , Memory power→VDDF(VCC) (2.7V ~ 3.6V)




KLMAG1JETD-B041 eMMC  128Gb x1 16GB 



嵌入式多媒体卡KLMAG1JETD-B041 eMMC 的描述:

SAMSUNG eMMC is an embedded MMC solution designed in a BGA package form. eMMC operation is identical to a MMC device and therefore is a simple read and write to memory using MMC protocol v5.1 which is a industry standard.

eMMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF or VCC) whereas 1.8V or 3V dual supply

voltage (VDD or VCCQ) is supported for the MMC controller. SAMSUNG eMMC supports HS400 in order to improve sequential bandwidth, especially

sequential read performance.

There are several advantages of using eMMC. It is easy to use as the MMC interface allows easy integration with any microprocessor with MMC host.

Any revision or amendment of NAND is invisible to the host as the embedded MMC controller insulates NAND technology from the host. This leads to

faster product development as well as faster times to market.

The embedded flash management software or FTL(Flash Transition Layer) of eMMC manages Wear Leveling, Bad Block Management and ECC. The

FTL supports all features of the Samsung NAND flash and achieves optimal performance.



型号/规格

KLMAG1JETD-B041 eMMC

品牌/商标

SAMSUNG/三星

封装

BGA-153

批号

22+

无铅/环保

无铅/环保

电压(伏)

1.8V/3.3V

温度规格

-25°C~+85°C

速度

52MHz

标准包装数量

1120

接口

HS400

封装尺寸

11.5 x 13 x 0.8 mm