图文详情
产品属性
相关推荐
资料链接:https://pan.baidu.com/s/1b31IeLyi_sNMWzRPN0ldqQ 提取码:rv8u
MAX31855具有冷端补偿,将K、J、N、T或E型热电偶信号转换成数字量。 器件输出14位带符号数据,通过SPITM兼容接口、以只读 格式输出。转换器的温度分辨率为0.25℃,高温度读数 为+1800℃,低温度读数为-270℃,对于K型热电偶, 温度范围为-200℃至+700℃,保持±2℃精度.
说明:
一、测量温度范围: 零下200摄氏度 至 零上1350摄氏度
二、适用探头,K型热电偶,模块不配套,需要独立购买
三、SPI接口,高速传输
四、输入电压3-5v直流
五、直接数字输出温度值,无需放大器,无需ADC
六、14位分辨率,0.25度温度精度
配置文件修改方法:
temperature_control.hotend.enable true #
temperature_control.hotend.thermistor_pin 0.24 #
temperature_control.hotend.heater_pin 2.7 #
temperature_control.hotend.thermistor RRRF100K #
temperature_control.hotend.set_m_code 104 #
temperature_control.hotend.set_and_wait_m_code 109 #
temperature_control.hotend.designator T #
修改为:
temperature_control.hotend.enable true #
#temperature_control.hotend.thermistor_pin 0.24 #
temperature_control.hotend.chip_select_pin 0.16
temperature_control.hotend.spi_channel 0 # SPI channel 0 or 1
temperature_control.hotend.heater_pin 2.7 #
#temperature_control.hotend.thermistor RRRF100K #
temperature_control.hotend.sensor max31855
temperature_control.hotend.set_m_code 104 #
temperature_control.hotend.set_and_wait_m_code 109 #
temperature_control.hotend.designator T #
Description
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard).
New! Now uses the MAX31855K instead of the MAX6675, so it can measure a wider temperature measurement range. Please note! the MAX31855 is not pin compatible or drop-in code compatible with the MAX6675. We do have an Arduino library for both chips but you'll need to adjust any existing MAX6675 designs for the mew MAX31855. The MAX6675 has been discontinued by Maxim.
Version 2.0 now includes ferrite beads and filter capacitor onboard for better stability
Works with any K type thermocouple
Will not work with any other kind of thermocouple other than K type
-200°C to +1350°C output in 0.25 degree increments - note that K thermocouples have about ±2°C to ±6°C accuracy
Internal temperature reading
3.3 to 5v power supply and logic level compliant!
SPI data output requires any 3 digital I/O pins.
MAX31855
热电偶模块
测温度传感器
热电偶模块开发板
MP1484EN DC-DC航模降压电源模块 同步整流 电压转换 超小体积
nano V3.0 ATMEGA328P 无焊接 CH340G改进版 电子积木 互动媒体
GY-530 VL53L0X 激光测距传感器ToF 飞行时间测距原装传感器模块
GY21 SHT21 HTU21D 替代SI7021 温湿度传感器模块 I2C接口
Nano V3.0 ATMEGA328 FT232RL 进口芯片 兼容版
锂电池充电板5v转4.2v 1A模块 TP4056 MICRO USB接口带过放保护
DHT21/AM2301(2301A)电容式数字温湿度传感器模块替代SHT10 SHT11
GY-ADXL346 GY-ADXL362三轴加速度传感器模块 I2C/SPI接口/倾斜感
GY-273 QMC5883L电子指南针罗盘模块 三轴磁场传感器
AHT21数字温湿度传感器模块AHT21B I2C通讯响应迅速 抗干扰强