High Pressure (coned & threaded) type connections for 1
/8", 1
/4", 3
/8", 9
/16" and 1" O.D. tubing.
Non-rotating tip stems are standard for on-off service and
insure long life on valve seats. Regulating tip stems are available
for all valves at no additional cost, add - REG to part number.
Glands and collars for tubing are supplied with each valve
unless otherwise requested (glands and collars shown on
pages 4.8 and 4.A).
Materials include high tensile type 316 stainless steel bodies
and hardened 17-4PH stainless steel lower section stems.
Packing is Teflon (450°F) standard with optional Viton (350°F),
BUNA-N (200°F) and Grafoil (800°F) available at no additional
cost.
Air operators for remote control operation are available for
all valves. (Select required valve and add “HIPCO”. Refer to
section 7.0 for additional data).
High temperatures can be accommodated using extended
stuffing boxes (see page 6.4). These are available for all sizes
except 1
/8" tubing. To order, add suffix -HT to standard valve
catalog number
