功能:
50-600W的DC-DC转换器,高密宽范围输入输出调整功能, Simple function, 50 to 600W DC-DC converters
3.3V 5V 12V 15V 24V 28V 48V
性能:
Input range VDC 24V nom: 18-36, 48V nom: 36-76V, 110V nom: 82-185V, 280V nom: 200-400V
Output Voltage Adj. Range
负载点:
VDC 2.97~3.63 4.5~5.5 10.8~13.2 13.5~16.5 21.6~26.4 25.2~30.8 43.2~52.8
Line Regulation 0.4% or 20mV (whichever is greater) over entire input range with constant load
Load Regulation 0.8% or 40mV (whichever is greater) from no load to full load with constant input line
Ripple and Noise pk-pk 100mV 150mV 240mV 280mV 480mV
Series Operation - Possible - Refer to installation manual
Over Voltage Protection - 150 - 180% 125 - 145%
Overload Protection - Approximately 105 - 140%, automatic recovery
Remote On/Off - Low = ON, Open = OFF
Remote Sensing - PH100S, PH150S, PH300S, PH600S models
Parallel operation - PH300S & PH600S only: Requires external circuitry
Inverter Good signal - PH300S & PH600S only: Signal available for status of inverter
Thermal Protection - Internal sensing, self resetting
Cooling - Conduction or forced air. See application notes for cooling and heatsink selection
Operating Temperature Range - Baseplate temperature -20°C to +85°C (100°C on PH300 & PH600).
- -40°C start up possible with 30 minute warm up period
Storage Temperature - -40°C to +85°C (+100°C on PH300 & PH600)
Temperature Coefficient - 0.02%/°C
Isolation - Input to output: 3000VAC, Input to Baseplate: 2500VAC(1)
Isolation Resistance - Output to Baseplate -100MOhm at 500VDC and 70%RH
Safety Agency Approval - UL1950, CSA234, EN60950 and CE Mark.
Warranty - Two years
特征:
Note: See Installation Manual for full details, test methods of parameters and application notes
(1) PH300S48 models: Input to output 1.5kVAC, input to baseplate 1.5kVACPH-S Series
3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4
Other Lambda DC-DC Products
-Vin Negative Input Terminal