晶创和立4mm光敏电阻GL4516

光敏电阻系列：Ф3、Ф4、Ф5、Ф7、Ф11、Ф12、Ф20等全系CdS光敏电阻、金属壳光敏电阻、塑料壳光敏电阻

Ф3：GL3516 、GL3518、GL3526、GL3527、GL3549等

Ф4：GL4516 、GL4518、GL4528、GL4527、GL4539、GL4549等

Ф5：GL5616 、GL5626、GL5637、GL5639、GL5649、GL5528、GL5537、GL5539、GL5549等

Ф7：GL7516 、GL7528、GL7537、GL7539、GL7549等

Ф12：GL12516 、G12528、GL12537、GL12549；塑料壳:GL12510 、GL12511等

Ф20：GL20528 、GL20516、GL20537、GL20549等

GL4516注意事项（matters needing attention）： 1,光敏电阻含有镉（Cd)，不符合ROHS，如果一定要环保的光敏元件，选购晶创和立的光敏传感器。 The photoresist contains cadmium (Cd), which does not comply with ROHS. If you must have environmentally friendly photosensitive elements, you can choose the photosensitive sensor series of Shenzhen Jingchuang Heli Technology Co., Ltd 2,储存环境：-30-50度温度内干燥避光环境下保存，以免引脚氧化。 Storage environment: - 30-50 ? C, dry and protected from light to avoid pin oxidation. 3，焊接时焊点离光敏电阻本体要在3mm以上。以免高温破坏产品。 During welding, the distance between the welding spot and the photoresist body shall be more than 3mm. So as not to damage the product at high temperature. 4，焊接时不能温度过高，焊接时间过长。以免高温破坏产品。 During welding, the temperature shall not be too high and the welding time at shall not be too long (no more than 3 seconds). So as not to damage the product high temperature.

基本概念（Basic concepts）： 1，亮电阻（ Light resistance）：在标准光源A（色温2854K)400-600LUX光线下照射2个小时后，再在10LUX光线下测得的阻值。 Measured at 10 Lux with standard light A (2854K color temperature) and 2hr illumination at 400-600 lux prior to testing. 2，暗电阻（Dark Resistance）：在A光源下关闭10LUX后第10秒钟的阻值（Measured 10 senconds after closed 10 lux.） 3，伽马值（ Gamma Characteristic）：Between 10 lux ande 100 lux and given by γ = lg(R10/R100) 4，功耗（Wmax):环境温度为25℃时的功耗。 Max. power dissipation at ambient temperature of 25 ℃. 5,耐压（Vmax):在黑暗状态下可连续施加到电阻上的电压。 Max. voltage in darkness that may be applied to the cell continuously.