ADP3303-xx–SPECIFICATIONS 1
Parameter Symbol Conditions Min Typ Max Units
OUTPUT VOLTAGE VOUT VIN = VOUTNOM +0.5 V to 12 V
ACCURACY IL = 0.1 mA to 200 mA
TA = +25°C –0.8 +0.8 %
VIN = VOUTNOM +0.5 V to 12 V
IL = 0.1 mA to 200 mA –1.4 +1.4 %
LINE REGULATION ∆VO VIN = VOUTNOM +0.5 V to 12 V
∆VIN TA = +25°C 0.01 mV/V
LOAD REGULATION ∆VO IL = 0.1 mA to 200 mA
∆IL TA = +25°C 0.013 mV/mA
GROUND CURRENT IGND IL = 200 mA 1.5 4 mA
IL = 0.1 mA 0.25 0.4 mA
GROUND CURRENT IGND VIN = 2.5 V
IN DROPOUT IL = 0.1 mA 1.12 2.5 mA
DROPOUT VOLTAGE VDROP VOUT = 98% of VOUTNOM
IL = 200 mA 0.18 0.4 V
IL = 10 mA 0.02 0.07 V
IL = 1 mA 0.003 0.03 V
SHUTDOWN THRESHOLD VTHSD ON 2.0 V
OFF 0.3 V
SHUTDOWN PIN ISDIN 0 < VSD < 5 V 1 µA
INPUT CURRENT 5 ≤ VSD ≤ 12 V @ VIN = 12 V 22 µA
GROUND CURRENT IN IQ VSD = 0, VIN = 12 V
SHUTDOWN MODE TA = +25°C 1 µA
VSD = 0, VIN = 12 V
TA = +85°C 5 µA
OUTPUT CURRENT IN IOSD TA = +25°C @ VIN = 12 V 2.5 µA
SHUTDOWN MODE TA = +85°C @ VIN = 12 V 4 µA
ERROR PIN OUTPUT
LEAKAGE IEL VEO = 5 V 13 µA
ERROR PIN OUTPUT
“LOW” VOLTAGE VEOL ISINK = 400 µA 0.15 0.3 V
PEAK LOAD CURRENT ILDPK VIN = VOUTNOM + 1 V 300 mA
OUTPUT NOISE VNOISE f = 10 Hz–100 kHz
@ 5 V OUTPUT CNR = 0 100 µV rms
CNR = 10 nF, CL = 10 µF 30 µV rms
NOTES
1
Ambient temperature of +85°C corresponds to a typical junction temperature of +125°C under typical full load test conditions.
Specifications subject to change without notice.
B
ADP3303
REV. –3–
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADP3303 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
PIN FUNCTION DESCRIPTIONS
