LCD 液晶电源

1. SCOPE(范围)

The AP180P-4HF comprises is a 180Watts multi-output open frame power supply

（AP180P-4HF是一款多路输出总输出功率为180瓦的开放式电源）

2. Feature(特性)

All products including samples delivered will meet all the requirements as outlined in the document. The basic requirements of the design features are listed below:

（*提供的产品包括样品将满足本文件所描述的产品规格。其设计基本要求如下）

* Output Voltages: 5Vsb, 5V, 12V, 24V.

（输出电压： 5Vsb, 5V, 12V, 24V）

* Short circuit protection / power limiting protection

（短路保护/过功率保护）

* High efficiency：The efficiency is greater than 82%

（*:大于82%）

3. Physical characteristics (物理特性)

3.1 尺寸：

190(L)*130.0(W)*25.0(H) mm (长L *宽W *高H)

Note: The sample height not include the components pin and PCB

样品的高度不包括元件引脚和PCB板

3.2 Weight（重量）

约300g

3.3 Power supply pin definition (电源连接器脚位定义)

Table.1  CON1交流电输入AC INPUT

           Note: C0N1 : 180º connection, t*e: pitch3.96mm(垂直插座CN1的间距是3.96毫米)

Table.2 CON2 10PIN直流输出座

Note: CON2 180º connection, t*e: pitch2.5mm (垂直插座CON2的间距是2.5毫米)

Table.3 CON3 4PIN直流输出座

Note: CON4 : 180º connection, t*e: pitch2.5mm(垂直插座CON2的间距是2.5毫米)

Table.4CON4 1*IN直流输出座

4. Electrical requirements(电气特性)

4.1 Input Electrical Characteristics Overview（输入特性）

Table.5 Input Electrical Characteristics(输入特性)

4.2 Inrush Current(浪涌电流)

The cold inrush current must not cause the input fuse to open or cause damage to components

冷启动浪涌电流*保险丝开路或者其它元器件损坏.

4.3 Output Voltages and Loads(输出电压与负载)

Table.6 Output Voltage, Current & Regulation.（输出调整率）

Note:

* The Max current or power should be test at other of dc output at Rated load, and the max current pulse width within 100ms

*大电流或功率是在其它各组负载在标称值时测试，且脉冲宽度小于100毫秒。