厂家-GCPQ-100海绵泡沫切割机(实验室专用)  

感谢长久以来对北京冠测实验仪器的大力支持！

需求产品可根据用户的需求进行量身订做，更多详细内容欢迎来电咨询！

厂家供应-GCPQ-100海绵泡沫切割机(实验室专用)

GCPQ-100

Sponge foam cutting machine (Laboratory)

GCPQ-100

海绵泡沫切割机(实验室专用)

A, sponge foam cutting machine is mainly applicable scope and function

This machine is mainly used for cutting the foam material, it can be hard foam, soft foam, plastic cut into square, rectangular, strip, with high cutting efficiency, cutting size is accurate, the advantage of high precision.

一、海绵泡沫切割机主要适用范围及功能

本机主要用于泡沫材料的切割，其可将硬质泡沫、软质泡沫、塑料切割成方形、长方形、条形等，具有切割效率高，切割尺寸准确，精确度高等优点。

Two, sponge foam cutting machine main technical requirements:

The 1, cutting the display resolution: 0.01mm

2, the cutting precision: ± 1mm

3, table size: 1000 x 700mm (according to user required)

4, can be effective stroke moving table 500mm

5, the minimum cut size: 25 x 25 x 10mm

6, the maximum thickness: 200mm

7, the power supply voltage: 380V

8, power: 2.2KW

二、海绵泡沫切割机主要技术要求：

1、切割显示分辨率：0.01mm

2、切割尺寸精度：±1mm

3、工作台尺寸：1000×700mm(可根据用户需要而定)

4、可移动工作台有效行程为 500mm

5、最小切割尺寸：25×25×10mm

6、最大试样厚度：200mm

7、电源电压:380V

8、功率： 2.2KW

Three, sponge foam cutting machine structure:

1, the machine is provided with a movable cutting alignment size device. In order to ensure cutting precision, fitted with digital display ruler.

2, the movable worktable, the negative pressure adsorption, fixed by cutting foam.

3, stop functioning, with manual, automatic device.

4, the red brake button for manual brake. When the start button is pressed the button is not available

5, when the braking electromagnet, press the start button, immediately release the brake electromagnet.

三、海绵泡沫切割机结构特点：

1、该机配有可移动切料调正尺寸装置。为保证切料尺寸精度，配有数字显示尺。

2、可移动工作台，采用负压吸附方式，固定被切割泡沫。

3、停止运转时，配有手动、自动装置。

4、红色刹车按钮用于手动刹车。当启动按钮按下时此按钮无效

5、当刹车电磁铁吸合时，按下启动按钮，刹车电磁铁立即释放。

Four, sponge foam cutting machine main equipment configuration

1, test a host

2, a set of control system

3, an adsorption device

4, a digital scale

5, a drive motor

6, the cutting blades (with a)

7, grinding wheel piece

8, a dust suction device

四、海绵泡沫切割机设备主要配置

1、试验主机一台

2、控制系统一套

3、吸附装置一套

4、数显标尺一个

5、驱动电机一个

6、切割刀一片(增配一片)

7、磨刀砂轮片一片

8、吸尘装置一套

北京冠测主营：专注于电压击穿、海绵泡沫检测、力学冲击、材料试验机、橡胶塑料等检测仪器的生产及销售. 质优价廉厂家直销。

产品生产厂家：北京冠测试验仪器有限公司

型号/规格

GCPQ-100

品牌/商标

北京冠测

厂家供应-GCPQ-100海绵泡沫切割机(实验室专用) &#160;

厂家供应-GCPQ-100海绵泡沫切割机(实验室专用)