模拟开关复用器PI3HDMI1310-AZLEX：
PI3HDMI1310-AZLEX开关电路是针对基于DVI/HDMI标准的高分辨率视频网络的。是一个3比1的HDMI Mux/demux交换机。它是为低位对位倾斜和高信道间噪声隔离而设计的.DVI/HDMI数据速率为3.4Gbps，提供了下一代HDTV和PC图形所需的分辨率。三个差分信道用于数据(DVI的视频信号或HDMI的音频/视频信号)，一个差分信道用于在输出端解码TMDS信号的时钟。是专为满足HPD端口的ATC-Sink要求而设计的。高速视频端口和DDC端口可以是源端口，也可以是接收器。所有TMDS I/O引脚都采用Pericom的ESD保护电路进行保护，支持对ESD损伤的保护，每IEC 6000-4-2规格的触点高达±8kV。
PI3HDMI1310-AZLEX的关键特征：
-
差分信道3：1用于TDMS信号的Mux/demux
-
DDC信号3：1 Mux/demux
-
利用主接收机芯片组理想EQ的非EQ阻塞电路
-
支持能源之星遵从性的低功耗
-
数据速率支持高达3.4Gbps(每个通道16位颜色深度)
-
端口选择的2引脚控制
-
3.3V电源和5V备用电源
-
所有I/O引脚上的ESD保护
-
±8kV接触每IEC 61000-4-2
-
7kV HBM/JESD 22
-
包装(无铅和绿色)：72-接触TQFN
Pericom Semiconductor’s PI3HDMI series of switch circuits are targeted for high-resolution video networks that are based on DVI/HDMI standards. The PI3HDMI1310-A is a 3-to-1 HDMI Mux/DeMux Switch. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation. The maximum DVI/ HDMI data rate of 3.4Gbps provides the resolution required by next generation HDTV and PC graphics. Three differential channels are used for data (video signals for DVI or audio/video signals for HDMI), and one differential channel is used for Clock for decoding the TMDS signals at the outputs. PI3HDMI1310-A was designed specifically to meet ATC-Sink requirement for the HPD ports. The high speed video ports and DDC ports can be either source or sink. All TMDS I/O pins are protected with Pericom's ESD protection circuits, supporting protection against ESD damage as high as ±8kV contact per IEC6000-4-2 spec.
Key Features
-
Differential channel 3:1 Mux/DeMux for TDMS signals
-
3:1 Mux/DeMux for DDC signals
-
Non-EQ blocking circuitry to utilize ideal EQ found in main receiver chipset
-
Low power consumption to support Energy Star Compliance
-
Data rate support up to 3.4Gbps (16bit color depth per channel)
-
2 pin control for port selection
-
3.3V power and 5V standby power
-
ESD protection on all I/O pins
-
±8kV contact per IEC61000-4-2
-
7kV HBM per JESD22
-
Packaging (Pb-free & Green): 72 - Contact TQFN
PI3HDMI1310-AZLEX的产品技术规范：
