模拟开关复用器PI3HDMI2410FFEX

模拟开关复用器PI3HDMI2410FFEX：

PI3HDMI2410FFEX开关电路是针对基于DVI/HDMI™标准的高分辨率视频网络的。是一个4比1的HDMI Mux/demux信号开关。它是为低位对位倾斜和高信道间噪声隔离而设计的.数据速率支持达到5 Gbps，能够满足HDMI1.3a标准，支持下一代HDTV和PC图形的分辨率要求。是专为ATC-Sink要求而设计的。所有开关控制设置通过I2C总线提供灵活的设计和减少外围组件。DDC总线的可选主动信号衰减器可以优化双向数据传输，适用于长轨迹或电缆应用。所有输入引脚都用佩里科姆的ESD保护电路来保护，以支持高达8kV的触点，每IEC 61000-4-2级4级规格。

4：1 HDMI开关无阻塞EQ通路，用于主接收机芯片组的理想EQ控制-3dB带宽可达5 Gbps，以支持HDMI 1.3a(每通道16位颜色深度)HDMI 1.4数据速率就绪的dddc有源信号衰减器或无源开关可选择的I2C寄存器控制开关配置配置HDCP自动复位电路，以便在从一个端口切换到另一个HPD极性控制和信号触发时，通过I2C寄存器设置连接器插入式检测和中断标志设置开关HPD 5V信号电平移位器，提供开路漏极输出级或输出电源和输出Buff 3.3V电源和输出电源。待机电源tmds输出支持低功耗控制，以支持所有I/O引脚8kV触点上的ESD保护，每IEC 61000-4-2，4级包装(无铅和绿色可用)：80-联系LQFP

The PI3HDMI series of switch circuits are targeted for high-resolution video networks that are based on DVI/HDMI™ standards. Th e PI3HDMI2410 is a 4-to-1 HDMI Mux/DeMux signal switch. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation. Th e maximum data rate support is up to 5Gbps which can meet HDMI 1.3a standard and support the resolution requirement of next generation HDTV and PC graphics. PI3HDMI2410 is designed specifi cally for ATC-Sink requirements. All switch control settings are through I2 C bus to provide fl exible design and reducing peripheral components. Selectable active signal buff er for DDC bus can optimize the bi-directional data transmission for long trace or cable applications. All input pins are protected with Pericom’s ESD protection circuits supporting ESD damage as high as 8kV contact per IEC61000-4-2 Level 4 specifi cation.

PI3HDMI2410FFEX的产品技术规范：