模拟开关复用器PI3USB103ZLEX

地区:广东 深圳
认证:

安吉达电子(深圳)有限公司

普通会员

全部产品 进入商铺

模拟开关复用器PI3USB103ZLEX:

PI3USB103ZLEX是一个单差分通道2:1复用器/解复用器USB2.0开关。行业的优势包括传播延迟小于250 ps,这是由于它的低通道电阻和I/O电容。该设备将从USB主机设备的差分输出多路复用到两个相应的输出之一。该开关是双向的,并提供很少或没有衰减高速信号的输出。它是专为低位对位倾斜,高信道间的噪声隔离,并兼容各种标准,如高速USB2.0(480 Mb/s)。PI3USB 103根据USB2.0规范提供过电压保护。当芯片打开或关闭时,所有的I/O引脚都能承受短到Vbus的冲击。如果VDD=0V,I/O仍然可以有信号存在,并且信号不会泄漏到VDD。

PI3USB103ZLEX的关键特征:

  • 符合USB2.0(高速和全速)
  • RON是3.0Ω典型的@vdd=3.0V
  • 低位对位倾斜
  • 低串扰:-33 dB@480 Mbps
  • 关断隔离度:-30 dB@480 Mbps
  • 近零传播延迟:250 ps
  • 电容通道:6.0pF(TIP)
  • VDD操作范围:3.0V至3.6V
  • 数据引脚I/O ESD(引脚1、2、4、5、6和7):±4kV触点/IEC 61000-4-2规范
  • -3分贝体重1400兆赫
  • I/O引脚有过电压保护,并能耐受短到vbus。
  • 包装(无铅和绿色):−10-接触TQFN,1.3mm x 1.6mm x 0.75mm(ZL 10)

PI3USB103ZLEX的技术属性:


范畴 高速信号开关
产品尺寸 1.6 x 1.3 x 0.75毫米
供应商包装 TQFN
针数 10
安装 表面安装
类型 高速信号开关
The PI3USB103 is a single differential channel 2:1 multiplexer/ demultiplexer USB 2.0 Switch. Industry leading advantages include a propagation delay of less than 250ps, resulting from its low channel resistance and I/O capacitance. The device multiplexes differential outputs from a USB Host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew, high channel-to-channel noise isolation and is compatible with various standards, such as High Speed USB 2.0 (480 Mb/s). The PI3USB103 offers over voltage protection per the USB 2.0 specification. With the chip powered on or off, all I/O pins can withstand a short to Vbus. If VDD = 0V, the I/Os can still have signals present, and the signal will NOT leak through to VDD.



型号/规格

PI3USB103ZLEX

品牌/商标

DIODES

封装

TQFN10

批号

19+

数量

1000