AFE58JD32ZBV优势分销只做原装

AFE58JD32ZBV描述

The AFE58JD32 device is a highly-integrated, analog front-end solution specifically designed for ultrasound systems where high performance, low power, and small size are required.

AFE58JD32ZBV The AFE58JD32 is an integrated analog front-end (AFE) optimized for medical ultrasound application. The device is realized through a multichip module (MCM) with three dies: two voltage-controlled amplifier (VCA) dies and one analog-to-digital converter (ADC) die. Each VCA die has 16 channels and the ADC die converts all of the 32 channels.

Each channel in the VCA die is configured in either of two modes: time gain compensation (TGC) mode or continuous wave (CW) mode. In TGC mode, each channel includes an input attenuator (ATTEN), a low-noise amplifier (LNA) with variable-gain, and a third-order, low-pass filter (LPF). The attenuator supports an attenuation range of 8 dB to 0 dB, and the LNA supports gain ranges from 20 dB to 51 dB. The LPF cutoff frequency can be configured at 5 MHz, 7.5 MHz, 10 MHz, or 12.5 MHz to support ultrasound applications with different frequencies. In CW mode, each channel includes an LNA with a fixed gain of 18 dB, and a low-power passive mixer with 16 selectable phase delays. Different phase delays can be applied to each analog input signal to perform an on-chip beamforming operation. A harmonic filter in the CW mixer suppresses the third and fifth harmonic to enhance the sensitivity of the CW Doppler measurement.

The ADC die has 16 physical ADCs. Each ADC converts two sets of outputs – one from each VCA die. The ADC is configured to operate with a resolution of 12 bits or 10 bits. The ADC resolution can be traded off with conversion rate, and operates at maximum speeds of 80 MSPS and 100 MSPS at 12-bit and 10-bit resolution, respectively. The ADC is designed to scale its power with sampling rate. The output interface of the ADC comes out through a low-voltage differential signaling (LVDS) which can easily interface with low-cost field-programmable gate arrays (FPGAs).

AFE58JD32 制造商: Texas Instruments

产品种类: 模拟前端 – AFE  

类型: Ultrasound AFE

分辨率: 10 bit, 12 bit

采样比: 40 MS/s, 50 MS/s

通道数量: 32 Channel

接口类型: JESD

电源电压-最大: 3.3 V

电源电压-最小: 3 V

最小工作温度: - 40 C

最大工作温度: + 85 C

安装风格: SMD/SMT

封装: NFBGA-289

AFE58JD32ZBV 特点: Analog Front End (AFE)  

产品: Analog Front End  

商标: Texas Instruments  

工厂包装数量: 126  

AFE58JD32ZBV特性
32-Channel, AFE for Ultrasound Applications:Input Attenuator, LNA, LPF, ADC,

Digital I/Q Demodulator and CW MixerDigital Time Gain Compensation (DTGC)Total Gain Range: 12 dB to 51 dB