LPC11E68JBD100E 微控制器 NXP

LPC11E68JBD100E

32-bit ARM Cortex-M0+ microcontroller; up to 256 kB flash and 36 kB SRAM; 4 kB EEPROM; 12-bit ADC

ARM微控制器 - MCU 256kB Flash ARM Cortex-M0+ based

General description LPC11E68JBD100E

The LPC11E6x are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at

CPU frequencies of up to 50 MHz. The LPC11E6x support up to 256 KB of flash memory,

a 4 KB EEPROM, and 36 KB of SRAM.

Features and benefits LPC11E68JBD100E

 System:

 ARM Cortex-M0+ processor (version r0p1), running at frequencies of up to 50 MHz with single-cycle multiplier and fast single-cycle I/O port.

 ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).

 AHB Multilayer matrix.

 System tick timer.

 Serial Wire Debug (SWD) and JTAG boundary scan modes supported.

 Micro Trace Buffer (MTB) supported.

 Memory:

 Up to 256 KB on-chip flash programming memory with page erase.

 Up to 32 KB main SRAM.

 Up to two additional SRAM blocks of 2 KB each.

 Up to 4 KB EEPROM.

型号: LPC11E68JBD100E 

制造商: NXP 

产品种类: ARM微控制器 - MCU 

RoHS:  无铅环保  

安装风格: SMD/SMT 

封装 / 箱体: LQFP-100 

核心: ARM Cortex M0+ 

数据总线宽度: 32 bit 

最大时钟频率: 50 MHz 

程序存储器大小: 256 kB 

数据 RAM 大小: 36 kB 

ADC分辨率: 12 bit 

输入/输出端数量: 80 I/O 

工作电源电压: 3.3 V 

最小工作温度: - 40 ℃ 

最大工作温度: + 105 ℃ 

接口类型: I2C, SSP, USART, USB 

封装: Tray 

程序存储器类型: Flash  

商标: NXP Semiconductors  

数据 Ram 类型: SRAM  

数据 ROM 大小: 4 kB  

数据 Rom 类型: EEPROM  

I/O 电压: 3.3 V  

ADC通道数量: 12  

计时器/计数器数量: 6 Timer  

工厂包装数量: 90  

电源电压-最大: 3.6 V  

电源电压-最小: 2.4 V  

单位重量: 1 g