MKE06Z128VLK4 ARM微控制器 NXP

MKE06Z128VLK4

ARM微控制器 - MCU Kinetis KE06: 48MHz Cortex-M0+ 5V/Robust MCU, 128KB Flash, 16KB SRAM, 80-LQFP

KE06 Sub-Family Data Sheet

Supports the following:

MKE06Z64VLD4(R),

MKE06Z128VLD4(R),

MKE06Z64VQH4(R),

MKE06Z128VQH4(R),

MKE06Z64VLH4(R),

MKE06Z128VLH4(R),

MKE06Z64VLK4(R), and

MKE06Z128VLK4(R)

Key features  MKE06Z128VLK4

• Operating characteristics

– Voltage range: 2.7 to 5.5 V

– Flash write voltage range: 2.7 to 5.5 V

– Temperature range (ambient): -40 to 105°C

• Performance

– Up to 48 MHz ARM® Cortex-M0+ core

– Single cycle 32-bit x 32-bit multiplier

– Single cycle I/O access port

• Memories and memory interfaces

– Up to 128 KB flash

– Up to 16 KB RAM

• Clocks

– Oscillator (OSC) - supports 32.768 kHz crystal or 4

MHz to 24 MHz crystal or ceramic resonator; choice

of low power or high gain oscillators

– Internal clock source (ICS) - internal FLL with

internal or external reference, 37.5 kHz pre-trimmed

internal reference for 48 MHz system clock

– Internal 1 kHz low-power oscillator (LPO)

• System peripherals

– Power management module (PMC) with three power

modes: Run, Wait, Stop  MKE06Z128VLK4

– Low-voltage detection (LVD) with reset or interrupt,

selectable trip points

– Watchdog with independent clock source (WDOG)

– Programmable cyclic redundancy check module

(CRC)

– Serial wire debug interface (SWD)

– Aliased SRAM bitband region (BIT-BAND)

– Bit manipulation engine (BME)