TI代理SN75176BDR,差分总线收发器,原厂百分百

地区:广东 深圳
认证:

深圳市金完美科技有限公司

VIP会员6年

全部产品 进入商铺

代理SN75176BDR,TI原厂百分百正品


描述

The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.

The SN65176B and SN75176B devices combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.

The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.特性Bidirectional TransceiversMeet or Exceed the Requirements of ANSI

Standards TIA/EIA-422-B and TIA/EIA-485-A

and ITU Recommendations V.11 and X.27Designed for Multipoint Transmission on

Long Bus Lines in Noisy Environments3-State Driver and Receiver OutputsIndividual Driver and Receiver EnablesWide Positive and Negative Input/Output Bus Voltage Ranges± 60-mA Max Driver Output CapabilityThermal Shutdown ProtectionDriver Positive and Negative Current Limiting12-kΩ Min Receiver Input Impedance± 200-mV Receiver Input Sensitivity50-mV Typ Receiver Input HysteresisOperate From Single 5-V Supply


型号/规格

SN75176BDR

品牌/商标

TI德州仪器

封装

SOP

批号

1945

型号

SN75176BDR

牌子

TI

数量

20000

批次

19